Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

h and 2h the same?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

h and 2h the same?

Post by sonny »

hi im new to 4x4's and i own a 82 60 series cruiser.its got a 2h diesel and i have been offered a h diesel for $150 complete but i dont want to buy it if nothing interchanges???is the starter motor etc the same in the h and 2h?will a h bolt straight into my 60 series where the 2h was?id like some spares but only if its usefull,the h motor runs good.thank you for any info.
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

I *think* they're the same except the 2H has an updated fuel system.

Buy it, pull it apart and consider it a learning curve.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 286
Joined: Mon Jul 25, 2005 8:06 pm
Location: N.Q.

Post by bigbrowndog »

Starter and alternator are the same, H motor is 3.6 liters and 2H motor is 4 liter capacity. 2H is a better motor besides being more powerful. cheers
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

http://en.wikipedia.org/wiki/Toyota_H_engine Doesn't really help.

Have a look on ih8mud.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

a h motor is a bit of a down grade, especially from the already gutless 2h. I'd recommend finding a 2h to replace if you need a new motor. they are cheap as chips. good ones start at 500.
Apart from that the h motor was never in the 60 series, and predates it so engineering wise it's a no-no.
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

Post by sonny »

thanks everyone for the info,my 2h runs very well but i thought for some spares i may grab the h because its cheap.if the starter motor and alt fit i think i will grab it.i got told its a h motor,the car its out of was a petrol and they changed it to a deisel so maybe its a 2h im not sure,is there anyway to tell them apart?my car has also had a 5 speed fitted so i goes alright :)
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

nah, spares don't interchange much at all. you'd be lucky to get alt and starter, the rest won't go.
Spit my last breath
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

bad_religion_au wrote:nah, spares don't interchange much at all. you'd be lucky to get alt and starter, the rest won't go.
Fair dinkum?

I was lead to believe otherwise?

Looks like your out of luck, Sonny.
Last edited by joel HJ60 on Mon Nov 30, 2009 8:30 am, edited 1 time in total.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

joel HJ60 wrote:
bad_religion_au wrote:nah, spares don't interchange much at all. you'd be lucky to get alt and starter, the rest won't go.
Fir dinkum?

I was lead to believe otherwise?

Looks like your out of luck, Sonny.
yep, even the early H and late H don't share much. learnt that the hard way...
Spit my last breath
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

Post by sonny »

is there something stamped on the engine to tell them apart?thanks.
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

to tell a H from a 2H?

a 2H's engine number will start with "2H" a H engine number starts with "H"
Spit my last breath
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

Post by sonny »

thanks everyone,i think i will give it a miss,i dont see any point in buying something i cant use :)
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Post by hj 45 »

Easy way to tell the difference, the tappet cover and timing gear housing look different when you compare a H and 2H, plus the H motor has siamesed inlets on number 3 and 4 cylinders (meaning that they're joined together, you can see this by looking at the intake manifold). I don't mind my H motor, it is slow though. You'd have to be nuts to swap from a 2H to a H though.
Post Reply

Who is online

Users browsing this forum: No registered users and 95 guests