Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear wheel cut...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

rear wheel cut...

Post by tanz-e »

hi everybody...
i cut all of my gaurds few months back so as to fit 35's under a 2'' lift...
however im not sure what to do about the front half of the rear gaurd... (where the plastic lines the gaurd)
if your not familiar with the ''bushwacker'' rubber flares they require a tab of steel in which to be screwed to..

i cant cut the plastic and bend the steel into a tab whilst keeping it all nice and tight and looking great...

just wondering if anybody understands what im talking about...? any solutions or am i stuck with it?... its not tooo bad, but tyres can rub under extreme flex
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

lowwer the bump stops.
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

could
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

or you couls screwor weld a angle shaped peice of shit behind the plastic and attach the flare to that. Or get side mount flare
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

yeah...
peice of angle welded to the cut guard with the plastic glued to that should work fine!
:armsup: :idea: :D
thanks mate...
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

jus wondering if u relise how funny/dodgy that sounds .
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 59
Joined: Wed May 07, 2008 2:58 pm
Location: Melbourne

Post by Look'n 4 Mud »

If you have a 2" body lift as well it should not hit there anyways with 35's
GQ TD42, MTQ Turbo, Frozen Boost IC, Flexi 5", Drop boxes, Locked both ends, Superiors everything. Custom rear bar, sliders, Hi Mount, Plasma. TOY. GU IV TD42T Tourer stock with a list.
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

im runnen two inch ironman suspension with 30 mill packers in the rear. (not the front cos ive only got alloy bullbar) so its more a 3''

and tyres hit bout halfway up the arch.

?wats dodgy about it????
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

must be the word...''glue''
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest