Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting TJM winch to Stock Patrol winch bar

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 140
Joined: Fri Aug 24, 2007 9:22 am
Location: Zeerust

Fitting TJM winch to Stock Patrol winch bar

Post by yorgerg »

Hi all,

Just looking for some info on fitting an OX 12k lb winch to the stock nissan patrol winch bar, its a GU 2002 model.

Do the stock nissan bars need a winch cradle/frame as per the TJM bars, or is it ok to fit the winch directly to the bar?

Having done a bit of research on it, the Warn XD9000 is the "Standard" winch that is fitted to these bars. Will there be any issue with the dimensions of the OX winch?


Cheers

Maso
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

From what i have seen of a standard steel bar on a GU it looked like it was made of steel with the same strength as cheese. A cradle made up to suit it would be a bare minimum.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 43
Joined: Sun Mar 16, 2008 5:37 pm
Location: This Side of the Black Stump

Post by luxoflex »

I have a standar Nissan steel winch bar with a TJM OX 10000lbs winch bolted directly onto the bar as most steel bars don't require a cradle.
The only mods you need to do are the drain hole and turn the clutch around on the winch it self, I hope this helps.
98 DX Patrol; bullbar factory, Ox/T-max 10000lbs winch, 3"lift Tjm, Outback draws, Waeco 50l, cargo barrier,240, Ibs battery kit, tow bar, solar panel 80w, roofrack, awning, shovel, sh*t paper
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

I belive the 12 000lb is too big for the factory bar. Just measure up. And no you do not need an extra cradle if it is a factory winch steel bar.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 102 guests