Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tdi rebuild
Moderator: Micka
Tdi rebuild
How long's a piece of string?? Mate's Defender has dropped no 4 cylinder, looks like major leakage past the rings, pressurising the crankcase and dumping oil in the turbo. Common problem?? and the biggy......how much to fix? The turbo may also need a rebuild $$$???
Re: Tdi rebuild
Roktruk wrote:How long's a piece of string?? Mate's Defender has dropped no 4 cylinder, looks like major leakage past the rings, pressurising the crankcase and dumping oil in the turbo. Common problem?? and the biggy......how much to fix? The turbo may also need a rebuild $$$???
Best guess I found was that it will be $6000 for a total rebuild incl injectors and pump. For some reason I dont think this includes labour so its not going to be cheap. I think a good second hand TDi goes for about the same money.
Sam
Pulled the head on the Tdi today. Major gasket blow out into the cam follower hole. Result: pressure in the sump forcing oil out the breather into the turbo. The rockers had also been too tight, and worn out the cap on the end of the valve stems. Should be a rocket on all 4 cylinders
Looks like a couple of hundred to fix rather than a couple of thousand
Looks like a couple of hundred to fix rather than a couple of thousand
Who is online
Users browsing this forum: No registered users and 13 guests