Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33s on a nearly stock paj/monty

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 9
Joined: Mon Nov 16, 2009 7:54 am
Location: North Carolina USA

33s on a nearly stock paj/monty

Post by scrubber3 »

I have a 1995 montero LS that I have raised up in the front via way of torsion bar crank as far as I could. I was wondering if some 33x10.5s would pose a problem at all. These of course are called pajeros for you Aussies! Seems like they will fit, but I am just curious as to any issues I may have from anyone's prior experiences. Thanks fellas!
Top
Posts: 16
Joined: Mon Apr 20, 2009 4:32 pm
Location: Pirongia NZ

Post by jtop matt »

Which engine is it?
Top
Posts: 9
Joined: Mon Nov 16, 2009 7:54 am
Location: North Carolina USA

Post by scrubber3 »

3.0 lwb
Top
Posts: 16
Joined: Mon Apr 20, 2009 4:32 pm
Location: Pirongia NZ

Post by jtop matt »

They will fit as long as you have a minimum 2" lift in the rear as well.
Top
Posts: 9
Joined: Mon Nov 16, 2009 7:54 am
Location: North Carolina USA

Post by scrubber3 »

What spacers can I get? Where can I get them? I've used search and found that someone used some spacers made for a toyota sequia but I am not sure what year model or part number/ where to get them? Thank you so much for your help!
Top
Posts: 16
Joined: Mon Apr 20, 2009 4:32 pm
Location: Pirongia NZ

Post by jtop matt »

You can use some shorty GQ/GU springs to gain the lift required.
Top
Posts: 9
Joined: Mon Nov 16, 2009 7:54 am
Location: North Carolina USA

Post by scrubber3 »

what is a GQ/ GU? :?

Okay a patrol.... will some spacers for the patrol work? We don't have patrols here in the states. I can get the spacers cheaper... No patrols here means none at the wreckers. Will those work? If so, what size and for what year model? Thank you again!
Top
Posts: 193
Joined: Tue Nov 13, 2007 7:11 pm
Location: NZ

Post by WACKO »

i have 3ltr jtop. i put aftermarket springs in the rear, wound the torsion bars up and did a ball joint flip, then i was able to run 33/12.5 on crusier offset rims that stick out quite far. it only scrubed when turing full lock.

33s will fit yours with a minimum of fuss. i think you should just go get the tyres, put them on your vehicle. then you can see what you will need to do. i dont think it will be much if anything.
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
Top
Posts: 9
Joined: Mon Nov 16, 2009 7:54 am
Location: North Carolina USA

Post by scrubber3 »

WACKO wrote:i have 3ltr jtop. i put aftermarket springs in the rear, wound the torsion bars up and did a ball joint flip, then i was able to run 33/12.5 on crusier offset rims that stick out quite far. it only scrubed when turing full lock.

33s will fit yours with a minimum of fuss. i think you should just go get the tyres, put them on your vehicle. then you can see what you will need to do. i dont think it will be much if anything.
Yeah, you are probably right! It's just that there are not many paj/mont at all around here and the aftermarket and parts for them are few. Just want to be sure first! Thanks bud!
Top
User avatar
plh
Posts: 11
Joined: Fri Nov 27, 2009 11:36 pm
Location: Wisconsin, USA

Post by plh »

Good plan on the suspension mods...
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I have a 99 NL paj, factory "body lift" bout 45mm from memory .. running 235/85's (a true 32.2 inchs tall) with no scrubbing on stock rear suspension, clears without issue.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest