I have a warn xd9000 winch that the motor has died on. I first thought it was the solenoids, replaced those, still no luck, had it tested and the motor seems to be gone.
So my dillema is the following what do I do to replace the motor.
My options are;
1) Replace the motor with an aftermarket no name brand one for $200
2) Replace it with a genuine warn one at $500
3) Sell it and buy a new tigerz11 winch for $650
Any suggestions or opinions are welcomed.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch motor issues
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Motor 'Gone'?
What was tested? What happens, solonoids clicking but motor no worky?
I bet the brushes have siezed due to corrosion and no longer contacting the commutator, or the bushes are that worn there's nothing left.
Pull the end cap off and have a look, or take it to a Warn repairer/service place. $200 at most, way better than replacing with an import.
Or replace the motor with a 6hp.
What was tested? What happens, solonoids clicking but motor no worky?
I bet the brushes have siezed due to corrosion and no longer contacting the commutator, or the bushes are that worn there's nothing left.
Pull the end cap off and have a look, or take it to a Warn repairer/service place. $200 at most, way better than replacing with an import.
Or replace the motor with a 6hp.
Who is online
Users browsing this forum: No registered users and 9 guests