Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
replacing coils on an XL-7 GV
replacing coils on an XL-7 GV
Hey guys does anyone have an opinion on replacing the coils with taller ones (35mm higher) and not replacing the shocks? We need some more height for the sand. Would this be ok?
ah ok,
if u dont replace your shocks they will be close to their full extended limit. u will have no flex virtually can car will ride bad on the road. u will get bogged very easy and risk damaging the shock very easy.
if u do replace them u will have flex and a normal, safe, comfortable car to drive around.
definatly replace the shocks, dont be tight, do it right.
if u dont replace your shocks they will be close to their full extended limit. u will have no flex virtually can car will ride bad on the road. u will get bogged very easy and risk damaging the shock very easy.
if u do replace them u will have flex and a normal, safe, comfortable car to drive around.
definatly replace the shocks, dont be tight, do it right.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Maybe look into getting this kit....
http://outdoorauto4x4.com/p/601217/gv-b ... -50mm.html
Cheaper than the cheapest suspension kit and retains factory ride you also get 50mm lift as opposed to the 30-35mm most springs give you.
Also factor in camber bolts and a wheel alignment as part of the intall.
Fit up some 225/75/16 AT's and you have much more off road clearance!
http://outdoorauto4x4.com/p/601217/gv-b ... -50mm.html
Cheaper than the cheapest suspension kit and retains factory ride you also get 50mm lift as opposed to the 30-35mm most springs give you.
Also factor in camber bolts and a wheel alignment as part of the intall.
Fit up some 225/75/16 AT's and you have much more off road clearance!
Check out ODA1
http://www.auszookers.com/index.php?nam ... pic&t=8470
Same company as that previous link. ^
He supplys alot of stuff for Suzuki drivers and sounds like a great bloke to deal with. He is always on that forum.
http://www.auszookers.com/index.php?nam ... pic&t=8470
Same company as that previous link. ^
He supplys alot of stuff for Suzuki drivers and sounds like a great bloke to deal with. He is always on that forum.
I am Tim
crazynic wrote:Maybe look into getting this kit....
http://outdoorauto4x4.com/p/601217/gv-b ... -50mm.html
Cheaper than the cheapest suspension kit and retains factory ride you also get 50mm lift as opposed to the 30-35mm most springs give you.
Also factor in camber bolts and a wheel alignment as part of the intall.
Fit up some 225/75/16 AT's and you have much more off road clearance!
puting spacers to lift a car is illigal. insurance can refuse a claim and u can get fined from road side check points. there are allowed to be used to level out a car. ie a 10mm used in rear to level out saggy suspension etc.
plus thats a ripoff! $500. spacers are normally $40-$60 a pair, and those shocks are no more than $200 a pair if bought seperatly.
just do it properly the 1st time.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Who is online
Users browsing this forum: No registered users and 68 guests