Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Fuel tank from 99 lux with EFI.... Q???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 799
Joined: Mon Sep 08, 2003 12:17 pm
Location: South West Sydney

Removing Fuel tank from 99 lux with EFI.... Q???

Post by Elmo »

Just curious about fuel pressure and removing lines from an EFI'd truck...

Im kinda new to this whole modifying EFI world thing have always dealt with Diesel or Caburettors...

Have a 99' Lux with the 3RZ-FE 2.7 Petrol and am relocating the fuel tank so need to remove fuel lines and extend...

Just wondering what the go is with pressure etc?? Can you just pull them off? or is there a process you need to go through?

Cheers Rob
My name is Rob.

Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Just pull them off. Be prepared for a little squirt and you should be fine.
Posts: 1167
Joined: Tue Jun 16, 2009 10:42 am
Location: campbelltown

Post by MogLux »

All depends were the fuel pump is mounted, from my knowledge hiluxs never had a pump in the tank so the only pressure you will have at the tank will be gravity and what ever fuel is left in the tank.
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

efi hiluxs have the pump in tank
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Yep, Pump is in the tank. I just use hose clamps on my 3rz setup to fuel filter. Never leaks. Hose clamps hold 100psi on air fittings so it's gunna hold 40psi on the fuel pressure.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 70
Joined: Wed May 20, 2009 5:47 pm
Location: WARNEET

pump

Post by tiny80 »

remove 12 volt power to pump or batt so fire is limited cut fuel lines
fuel will come out return is better first less pressure but both can be just cut under pressure,. good quality hose clamps should be used like ones that are used on a holden efi 304 vn to vt on the back of the fuel rail
they are 316 s/s with bolt and nut and inner to protect pipe. all so you
can add a crox to the pipe to increase pressure with out blow out
lifted and locked 80 series landcrusier
turbo 1 fzfe straight gas 35" claws and heaps more crap inside
Posts: 12
Joined: Sun Mar 28, 2010 6:38 pm
Location: Qld

Post by Roboat »

Generally the way to do it is, disconnect the fuel pump solenoid and try start the car. Injectors will pulse no fuel will pump and all will be good.
Posts: 799
Joined: Mon Sep 08, 2003 12:17 pm
Location: South West Sydney

Post by Elmo »

aaaahhhhh thank you all very muchly.... Have been a great help
My name is Rob.

Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests