Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hj 60 landcruiser question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 25
Joined: Thu Dec 17, 2009 9:34 am
Location: melbourne

hj 60 landcruiser question

Post by rohan9376 »

were all 2h diesel hj60 series cruiser gear boxes 5 speed ???
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

2h

Post by brendan rooke »

Hey buddy,

hj60 cruisers came with a 4 speed in the earlier model before the switch to 5 speed,

They also came in auto

Or you can fairy overdrive your 4 speed.
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 25
Joined: Thu Dec 17, 2009 9:34 am
Location: melbourne

Post by rohan9376 »

thanks for reply freind has 82 hj60 wreck doesnt remember if its 5 speed or 4 speed , ill have to go up and check it my self thought they may have been all 5 speed need the box
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

60 series

Post by brendan rooke »

Make sure you double check the box for a 5th gear as 82 models still had 4 speeds in them, im not sure if it was late 82 or early 83 when they made the 5 speed box.

I had an 83 hj60 with a 5 speed.

Also when you get up to mid 84 model they made a better 5 speed with a bigger shaft, these models had a thicker gearstick at the base instead of a thin stick from base to the thread.
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 25
Joined: Thu Dec 17, 2009 9:34 am
Location: melbourne

Post by rohan9376 »

i am using this gearbox for a early fj60 81 model that has a 4 speeed, dellow conversion running a 265 chrysler hemi , its is the standard 4 speed set up as normal fj60 config, i have here also a hj60 may 1984 build , i was going to part it out , however i was told by dellow be carefull as they changed gearbox mid 84 as you mentioned , they said to be carefull reason bieng they are tilted 9 degrees and i would have to buy another bell housing from them to suit , i will check the gearshift today thanks for your advice
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

60 series

Post by brendan rooke »

I seen a 60 on ebay a while back with a hemi comversion!!!

Something different,

Its not the same truck is it???
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

rohan9376 wrote:i am using this gearbox for a early fj60 81 model that has a 4 speeed, dellow conversion running a 265 chrysler hemi , its is the standard 4 speed set up as normal fj60 config, i have here also a hj60 may 1984 build , i was going to part it out , however i was told by dellow be carefull as they changed gearbox mid 84 as you mentioned , they said to be carefull reason bieng they are tilted 9 degrees and i would have to buy another bell housing from them to suit , i will check the gearshift today thanks for your advice
I thought only 75s (I think) had a rotated transfer or maybe gearbox where is the info regarding the 60s having gbox rotated or is that autos... 9 degrees is a long way....
Show me the money..SHOW ME THE MONEY
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: 2h

Post by vk7ybi »

brendan rooke wrote:Or you can fairy overdrive your 4 speed.
Ive seen a Faireyed 5 speed.. Its value is wank factor only, but cool nonetheless..
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

I didnt think any gearbox had the transfer rotated? I have a BJ42, BJ74 and FJ60 5spds and they all look in the same orientation. Maybe the motor to gearbox had a slight tilt in some models?
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

From personal experience, dont use a fairy o/d 5spd in a cruiser that does alot of offroad work, and while you have the box out give it a full service.
Get out there!!
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

Re: 2h

Post by brendan rooke »

vk7ybi wrote:
brendan rooke wrote:Or you can fairy overdrive your 4 speed.
Ive seen a Faireyed 5 speed.. Its value is wank factor only, but cool nonetheless..
lol...yeah they do nothin for me.

Ive never had one or driven one but i reckon a second gearstick would be cool...like driving an old b-model Mack or something haha.
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

Post by brendan rooke »

hulsty wrote:I didnt think any gearbox had the transfer rotated? I have a BJ42, BJ74 and FJ60 5spds and they all look in the same orientation. Maybe the motor to gearbox had a slight tilt in some models?
Ive never heard of it either...they all look the same to me.

Ive wrecked out heaps of hj and fj 60's and they all look the same.

i had a fj60 box in my old 60 and i now have a 75 series box behind my 12ht.
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Post by hj 45 »

I do know that the bellhousings are different between a hj 47 and hj 75, the others, I'm not sure.
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

IIRC, the Dellows catalogue mentions something about transmission rotation.. Have a look in there, there might be some clues..
Post Reply

Who is online

Users browsing this forum: No registered users and 92 guests