Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33's on a rocky. Whats needed how much power loss

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

33's on a rocky. Whats needed how much power loss

Post by howsie »

93 - 94 rocky. Will 33's rob a lot of power and what is needed to fit them.

Basically at the moment stock standart turbo diesel sportsafield just got a 3 inch sports exhaust and am really worried about it loosing a lot of power as i drive up some pretty steep hills on the way home
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

I had a 2" body lift and a 2" suspension lift to fit mine, also i had to remove the plastic end caps from the front bumper.
Mine had 3" exhaust with no muffler, running 16 psi with a dynotune and pump adjusted and big ricer intercooler up front. Power loss was not really noticeable with the big wheels and offroad was nearly the same as well.

http://s160.photobucket.com/albums/t162 ... 0_0404.flv

Image
_____

[olllllo]
Posts: 43
Joined: Wed Sep 02, 2009 7:47 pm
Location: adelaide

Post by rokbebop »

that looks fat. what did you use to make those guard flares? they dont look like the stock ones that i cant get anywhere. the inner ones obviously.
Last edited by rokbebop on Mon Apr 26, 2010 2:46 pm, edited 1 time in total.
Posts: 306
Joined: Fri Oct 10, 2008 4:02 pm
Location: Hobart, Tasmania

Post by tas80 »

My old Rocky, was my first 4wd which I built up from standard, ran a 2 inch body lift and a few inches in the suspension using lifted springs and extended shackles. Ran a 2.5" exhaust and power loss was noticeable but not too bad.

Image

Image
100 Series Ute: Chopped, Locked and Rolled
GU Ute: Lotsa Good Stuff!
RIP UTED100, Hello GU Ute
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

flares were just the standard ones with 75mm flexiflare screwed to the outside, should also add the simex's actually measured 34" even though they were listed as 33"s and i ran 2" wheel spacers all round and the tyres just touched the leaf spring by about 1mm on full lock but this dissapeared when the tyres wore down a little.
_____

[olllllo]
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests