Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

The new great wall

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 85
Joined: Sat Aug 22, 2009 11:03 pm
Location: sydney

The new great wall

Post by brendo4b »

Anyone heard much about the new great wall 4x4s
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

Yeah....





Don't do it.
Posts: 13
Joined: Sun Sep 06, 2009 3:22 pm
Location: sydney

Post by 01lux »

Not much at all really, there have been a few adds on tv, they seem cheap...but i wonder what the build quailty would be like.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

:rofl:




Image
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

Check the forum for Great Wall... From memory it's in the same section as Ssanyong Musso's - http://www.outerlimits4x4.com/forum319.php
indubitably
Posts: 511
Joined: Tue Feb 10, 2009 6:09 pm
Location: Melbourne

Post by bigbear »

2002 design with 1970 build quality.
yesm.
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Even if they were awesome build quality I wouldn't buy one because they are so farken ugly!! :?
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

The Chinese can't even get a T-Shirt size right, so I wonder what their cars build quality is like????? :lol:
" Some days you are the bug; some days you are the wind screen"
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

Its not good at all.

I was following what appeared to be a rodeo dual cab the other day, and when I got past it, I saw what I can only describe as the ugliest piece of motoring Ive ever seen. YUKOLA!!
It looked like a late model rodeo dual cab with the front end that kind of looked like a older barina. Worst approach angle ever.
Id buy a Lada before I bought a Great Wall.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Post by GUtripper »

DUDELUX wrote:Its not good at all.

I was following what appeared to be a rodeo dual cab the other day, and when I got past it, I saw what I can only describe as the ugliest piece of motoring Ive ever seen. YUKOLA!!
Ever seen a Ssanyong ute?
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Kind of sounds like the comments when Hyundai came out here with cheap hatch backs, look at how many they sell these days.

The great wall might not be the best off roader, I highly doubt that ever designed it to be, but it opens up a new market and could potentially pull the ever growing prices of the more common dual cabs back a little.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

China is actually making a lot of very good quility products. A lot of engine & vehicle bearings come out of china now. It comes down to qaility control and getting through ADR,s and they have to come with warranties. Ugly but not many utes look good any way.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Post by SCANAS »

actually it's the other way around 1996 design with 2010 build quality.... I never said 2010 build quality was high!!! But on par with Hyundai, Kia, Renault I would say
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

China's building Merc's, Beamers, Chrysler, Ford, Toyota, everything.

Chongquing in central China is todays equivelent of Detroit, almost every car manufacturer is building there cars there.

Wont be long and your only option with a new car is Chinese built, maybe they put the badge on in Germany / Japan before shipping out, but there chinese built thats for sure.

catcha
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

They had a quick look at them in a certain 4x4 magazine a few issues ago (great wall that is) and the little diesel engine that comes in them had mitsubish proudly stamped on them. For memories its the 2.5 or whatever it was the paj's came out with. Im sure noone would complain about that but as for departure angles strength of components etc I would be cautious, but comming from china i bet it wont cost much to repair.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

88pajero wrote:They had a quick look at them in a certain 4x4 magazine a few issues ago (great wall that is) and the little diesel engine that comes in them had mitsubish proudly stamped on them. For memories its the 2.5 or whatever it was the paj's came out with. Im sure noone would complain about that but as for departure angles strength of components etc I would be cautious, but comming from china i bet it wont cost much to repair.
Expect high insurance costs, as it is more likely to be written off due to its low replacement cost, than repaired at the $15-20K mark.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

anyone found pics online of the chinese etc modifying them for offroad use? I think they'd look interesting if beefed right up.. lol
The worst thing about censorship is ███████.
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

88pajero wrote:They had a quick look at them in a certain 4x4 magazine a few issues ago (great wall that is) and the little diesel engine that comes in them had mitsubish proudly stamped on them. For memories its the 2.5 or whatever it was the paj's came out with. Im sure noone would complain about that but as for departure angles strength of components etc I would be cautious, but comming from china i bet it wont cost much to repair.
Nah its the petrols which are Mitsi units. 2.4L from the last model outlander. The diesels will be Great Wall developed units and aren't available yet apparently.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

DAMKIA wrote:
88pajero wrote:They had a quick look at them in a certain 4x4 magazine a few issues ago (great wall that is) and the little diesel engine that comes in them had mitsubish proudly stamped on them. For memories its the 2.5 or whatever it was the paj's came out with. Im sure noone would complain about that but as for departure angles strength of components etc I would be cautious, but comming from china i bet it wont cost much to repair.
Expect high insurance costs, as it is more likely to be written off due to its low replacement cost, than repaired at the $15-20K mark.
And if you are planning to lease one for business purposes, there will be no residual on offer. Finance companies won't take the risk of what they might be worth in 3-4 years...if they are still in one piece.
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

Micka wrote: ...if they are still in one piece.
a rangie enthusiast taking a jab at build quality! now i've seen everything :D
Spit my last breath
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

http://www.carsguide.com.au/site/news-a ... tes_review
The SA220 gets its power from a 2.2-litre four-cylinder engine putting out a modest 78 kW at 4600 revs and 190 Nm at 2400-2800 revs.
My 24 year old hilux motor makes 189nm of torque and 69kw. This is a carbied, 2.2L 4Y motor. Known to be a gutless slug.

In 24 years they've added 1 nm of torque and 10kw - from an injected 2.2L petrol. Did I say its a new motor?


:rofl: pieces of shit
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

craz3d wrote:http://www.carsguide.com.au/site/news-a ... tes_review
The SA220 gets its power from a 2.2-litre four-cylinder engine putting out a modest 78 kW at 4600 revs and 190 Nm at 2400-2800 revs.
My 24 year old hilux motor makes 189nm of torque and 69kw. This is a carbied, 2.2L 4Y motor. Known to be a gutless slug.

In 24 years they've added 1 nm of torque and 10kw - from an injected 2.2L petrol. Did I say its a new motor?


:rofl: pieces of shit
probably uses 1/4 the fuel to make the same power ;)
Tetanus rolling on 37's
Posts: 309
Joined: Tue Jan 30, 2007 8:24 pm
Location: newcastle

Post by simcoe »

dont know about the new new ones but one of dads silly(idiot) mate bought one and had the brake pads replaced like 5 times in 20thou km before the smart dealer realised that the disks were as warped as a teenage mind on acid!
Also tyre wear was absolutely stupid, inside edge was down the canvas and outside has full tread! And no tyre shop could help, they reckon it was bent diffs and axels...
He has since "drowned" it launching his boat ;) ;) best thing he ever did!!!
00 td42t wagon
stock engine, set up for work and play!
engine soon to be honking ;-)
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

craz3d wrote:http://www.carsguide.com.au/site/news-a ... tes_review
The SA220 gets its power from a 2.2-litre four-cylinder engine putting out a modest 78 kW at 4600 revs and 190 Nm at 2400-2800 revs.
My 24 year old hilux motor makes 189nm of torque and 69kw. This is a carbied, 2.2L 4Y motor. Known to be a gutless slug.

In 24 years they've added 1 nm of torque and 10kw - from an injected 2.2L petrol. Did I say its a new motor?


:rofl: pieces of shit
hows the 4y rated tho? from what i recall, they use a different rating method now, vs then. i mean ford and holden today both use different methods
Spit my last breath
Posts: 38
Joined: Sat Jan 02, 2010 12:30 pm
Location: TOORMINA N.S.W.

Post by 4 Ears »

One of my neighbours is a Honda & Mazda Dealer. He has just returned from a trip to China & brought back brochures which indicate that the Chinese are doing what the Japanese did when they first sent vehicles to Australia.
They are doing copies of vehicles from other manufacturers with very slight deviations from the Japanese models but with older model motors. He said they have authority to begin sending these vehicles to us despite them having difficulty meeting our Design Rules.
That should lead to some interesting spectating!
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

wouldnt be surprised if the-
indicators a brake.
turn the steering wheel left and it goes right.
regardless of turning circle any park takes at least three points.
it doesnt go faster than 50.
all the indicators are fake, so ya never really know where ones going.
push the accelerator and it takes minimum 45 seconds to respond...

ect. ect. ect.
:P
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

if ya gona rev it, Chev it
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Heard of quite a few of these and the owners are rapt with them. They are a bit slow but otherwise, build quality isn't too bad, specs are fine for the price and they are finding accesories and starting to mod them
Ransom note = demand + collage
Posts: 1293
Joined: Sun May 01, 2005 10:28 pm
Location: Ferntree Gully

Post by Bluefreak »

I crawled in, out and over one of these at Knox City - everything underneath 'looks' adequate but not exceptional... Cab external quality is equal to any of the dual cabs coming out of Thailand, cab interior shit all over my Triton for quality of finish including softer leather for the steering wheel and gear knobs... Seats were more comfy than any of the Jap dual cabs I've sat in...

I personally wouldn't buy one but the quality is coming up...!!!
I wish my lawn was EMO, then it would cut itself...
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

Bluefreak wrote:I crawled in, out and over one of these at Knox City - everything underneath 'looks' adequate but not exceptional... Cab external quality is equal to any of the dual cabs coming out of Thailand, cab interior shit all over my Triton for quality of finish including softer leather for the steering wheel and gear knobs... Seats were more comfy than any of the Jap dual cabs I've sat in...

I personally wouldn't buy one but the quality is coming up...!!!
This is how they get you. Sure, it's good when you want to buy it, but can you trust it to last you a decade or more?
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests