Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer Chain
Moderator: Tiny
Transfer Chain
When I decelerate my transfer chain has always made a noise. It only does it on decelerating. My other feroza makes the same noise. Just wondering do all ferozes have this inherit noise and if so can you tighten the chain?
I bought my Feroza with "Gearbox issues", after getting it home and some quick tests it was found to be the transfer - pulled it apart and, well, the pre-rebuild picture tells the story - the chain had snapped and luckily jammed itself tight against the plastic oil-distribution tube.
Unless your hubs are locked, or the box is in 4WD (4L or 4H) then the chain will not be moving at all, as the gear that controls it is in neutral while in 2wd, and the hubs would need to be locked for the forward motion to manually turn it.
Unless your hubs are locked, or the box is in 4WD (4L or 4H) then the chain will not be moving at all, as the gear that controls it is in neutral while in 2wd, and the hubs would need to be locked for the forward motion to manually turn it.
Who is online
Users browsing this forum: No registered users and 0 guests