Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Good replacement seats for standards on a GQ
Good replacement seats for standards on a GQ
Anybody got new seats in there patrol? what brands and where from? Any
thoughts and info would be great thanks.
thoughts and info would be great thanks.
92 gq lwb 4.2 efi cheezy winch bar ,10000 tjm winch ,custom rear tube bar , rock sliders, 35 bfg muds = plenty of battle scars !
These Recaro seats are in the shorty that I've just bought. I need to re do the boulster on the side of the chair but they are really comfy and give pretty good support.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
I put ba xr6turbo / xr8 seats in my ute,
3 of the 4 bolt holes lined up.
Just need to extend one of the back holes with some plate about 50 mm and shorten the little knob you use to tilt the seats
there sweet seats.
I can get some pix if you like.
troy
3 of the 4 bolt holes lined up.
Just need to extend one of the back holes with some plate about 50 mm and shorten the little knob you use to tilt the seats
there sweet seats.
I can get some pix if you like.
troy
its just a scratch, she'll buff out
BOONDALL BACKYARD PERFORMANCE
BOONDALL BACKYARD PERFORMANCE
would be very keen for some pics. they sound better than sh!tty bommodore seats.troylux wrote:I put ba xr6turbo / xr8 seats in my ute,
3 of the 4 bolt holes lined up.
Just need to extend one of the back holes with some plate about 50 mm and shorten the little knob you use to tilt the seats
there sweet seats.
I can get some pix if you like.
troy
These are the seats, I think they are heaps better than the commodore seats. they are out of a BA XR6 turbo / XR8 and have adjustable lumbar support on the driver and passenger seats, they cost me $300 for the pair.
You need to pull the knob off that adjusts your back rest and cut the back of it so its flush about 3 cm, (it is easy to do as its only plastic) you will also need to cut the rod down that the knob sits on. and cut the plastic thing like I have so it all fits in.
I used the GQ rails.
The only other mod I needed to do was lengthen the inside of each seat rail (I think it was either 50 or 70mm) I just used a piece of flat bar and bolted it on, the outside rail on each side fits perfectly.
You need to pull the knob off that adjusts your back rest and cut the back of it so its flush about 3 cm, (it is easy to do as its only plastic) you will also need to cut the rod down that the knob sits on. and cut the plastic thing like I have so it all fits in.
I used the GQ rails.
The only other mod I needed to do was lengthen the inside of each seat rail (I think it was either 50 or 70mm) I just used a piece of flat bar and bolted it on, the outside rail on each side fits perfectly.
its just a scratch, she'll buff out
BOONDALL BACKYARD PERFORMANCE
BOONDALL BACKYARD PERFORMANCE
Those seats look pretty good in there. Not much room to adjust them though but once you get them where you want to then who cares.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Who is online
Users browsing this forum: No registered users and 1 guest