Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.3 high pinion for lux is from...?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

4.3 high pinion for lux is from...?

Post by justinshere »

Hey

Chasing a 4.3 high pinion front centre for a lux. Are they from the bundys? If so what year and engine?
Also will it bolt straight in no mods needed?

Cheers Justin
----------------------------------------------------
Xcab Lux on 37 Treps
Top
Posts: 11
Joined: Wed Jan 10, 2007 6:23 pm
Location: brisbane

Post by jlux3012 »

I think you will find an 80 series diff centre is high pinion and will bolt into your solid axle diff.
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

Bundies and 80's. They will fit with no mods.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Post by justinshere »

Sweet, thanks guys. So what has the 4.3s, dsl or petty cruiser or bundy?
----------------------------------------------------
Xcab Lux on 37 Treps
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

justinshere wrote:Sweet, thanks guys. So what has the 4.3s, dsl or petty cruiser or bundy?
all 105's are 4.3 high pinion.. ALL 80's are 4.1's dunno wat ratios bundys were
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 48
Joined: Sat Sep 12, 2009 8:27 am
Location: Mackay

Post by 80gus »

crankycruiser wrote:
justinshere wrote:Sweet, thanks guys. So what has the 4.3s, dsl or petty cruiser or bundy?
all 105's are 4.3 high pinion.. ALL 80's are 4.1's dunno wat ratios bundys were
The Bundy i stripped was 4.11 petrol
Top
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Post by justinshere »

80gus wrote:
crankycruiser wrote:
justinshere wrote:Sweet, thanks guys. So what has the 4.3s, dsl or petty cruiser or bundy?
all 105's are 4.3 high pinion.. ALL 80's are 4.1's dunno wat ratios bundys were
The Bundy i stripped was 4.11 petrol
And I've heard of bundys also being 4.88
----------------------------------------------------
Xcab Lux on 37 Treps
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Some of the bundies did have 4.3's and also the 105 cruisers Petrol and non-turbo desiel's.

I run a 4.3 high pinion in my lux.

No mods needed. Run the same air locker as low pinion.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

Willy Hilux wrote:Some of the bundies did have 4.3's and also the 105 cruisers Petrol and non-turbo desiel's.

I run a 4.3 high pinion in my lux.

No mods needed. Run the same air locker as low pinion.
Just with what you have said above to clarify something...

Bundies would run the same lokker as the lux 4cyl low pinion centre (same size bearings) but not 80/105 series. These have bigger bearings, but are the same as a V6 lux centre.

And as said, all bolt up fine, no mods.

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Post by justinshere »

Ok. Thanks for all the info.

Off to the wreckers tomorrow.
----------------------------------------------------
Xcab Lux on 37 Treps
Top
Posts: 171
Joined: Sun Aug 12, 2007 7:33 pm
Location: frankston

Post by pozman »

petrol bundy should be 4.30, mine is anyway

and can run the large bearing lockers, you just need the new bearings
Top
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Post by justinshere »

pozman wrote:petrol bundy should be 4.30, mine is anyway

and can run the large bearing lockers, you just need the new bearings
"You just need new bearings"... From an 80 or 105?

To clarify no 80s have 4.3s?
----------------------------------------------------
Xcab Lux on 37 Treps
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Same as pozman, Petrol 4.3 and Diesel 4.88.
Newer/current ARB RD132 fits all Toyota HP & LP 8" centres.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re:

Post by crankycruiser »

justinshere wrote:
pozman wrote:petrol bundy should be 4.30, mine is anyway

and can run the large bearing lockers, you just need the new bearings
"You just need new bearings"... From an 80 or 105?

To clarify no 80s have 4.3s?

Definatly NO 80's had 4.3's. all 105's were 4.3
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 171
Joined: Sun Aug 12, 2007 7:33 pm
Location: frankston

Re: 4.3 high pinion for lux is from...?

Post by pozman »

yeah i think there just the later model bearings, they list the part number in the airlocker fitting book

as far as i know all cruisers, (real ones) are 4.11, but some one may know better than i

paul
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 68 guests