I'm in the process of doing the wiring for my 2L-t => 3RZ conversion and need a little help from the Outers 3RZ Guru's.
The 3RZ will be controlled by an EMS Stinger ECU and while running through the wiring today i've got everything set-up but there is a part that has got me a bit stumped.
The part # on it is 90980-04083 and it doesn't appear in the Toyota EPC but a google search revealed that it is a condenser / capacitor of some description?
Can anyone tell me what this does and is it necessary to keep it? I'm assuming that i can get rid of it but i don't know what it does so may be integral.
Thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3RZ Part #
Moderators: toaddog, Elmo, DUDELUX
Resident Terrorist
Re: 3RZ Part #
Got a pic? I think it's a noise filter that's wired to the ignitor to stop engine noise coming through the stereo.
Re: 3RZ Part #
Hi ray,
below is a pic. would make sense from what you have said and what i have read i think you are correct.
Has 2 wires, 1x 12V supply and the other goes to ground. I initially thought it was a resistor of some description but think otherwise now.
below is a pic. would make sense from what you have said and what i have read i think you are correct.
Has 2 wires, 1x 12V supply and the other goes to ground. I initially thought it was a resistor of some description but think otherwise now.
Who is online
Users browsing this forum: No registered users and 2 guests