Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

blast and powdercoat Bayswater (vic)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

blast and powdercoat Bayswater (vic)

Post by ash_on_mtb »

Looking for recommendations for sandblasting then powdercoating a spare wheel carrier next week. Its come off the old truck, and heading for the new, but its looking its age at the moment. Want to get it blasted to remove old powdercoat, possibly treat rust damage if the blasting doesn't dispose of it, then get it powdercoated for its next application.

Bayswater preferably, Barry St/Malvern road ideally, but can travel a little if you know someone who can do a good job and help out...

Suggestions, experiences, advice, recommendations all better than the yellow pages. IF you know someone, hook a brutha up.

Thanks
'97 HDJ80 - worth the wait
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: blast and powdercoat Bayswater (vic)

Post by chimpboy »

I have not used them, but I was asking the people at Eastern Auto Paints for a good sandblaster in the area (they have been there ages and know all the other businesses in their area pretty well). They recommended Neil at Bayswater Powdercoating, 1/12 Melrich Rd ph. 9762 4991.

Again, no direct experience but Eastern Auto Paints have usually steered me pretty well.

If you do check the place out let me know how it goes as I may need to use them soon.
This is not legal advice.
Posts: 5
Joined: Fri Apr 17, 2009 12:14 pm
Location: victoria

Re: blast and powdercoat Bayswater (vic)

Post by turborooster »

Got my sliders and bullbar blasted at a place next 2 beaver bricks in colchester rd kilsyth. pretty cheap and a good job done the same day as taking them in. Got powder coating done at ark powder coating. They did 2 coats (1 zinc undercoat, 1 color) good job so far. They are on dorset rd near the corner of mountain hwy. Hope that helps
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

Re: blast and powdercoat Bayswater (vic)

Post by ash_on_mtb »

Bayswater powdercoating seem very helpful, and have the full range of equipment and procedures, so I'll give them a shot.

Cheers,
'97 HDJ80 - worth the wait
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

Re: blast and powdercoat Bayswater (vic)

Post by ash_on_mtb »

got the spare wheel carrier back tonight.

Bayswater powdercoaters did a good job.

Chemical dip to remove the old powdercoat.

Blast to remove rust scale etc and smooth the damage out.

Powdercoat smooth as you like. :armsup:

Looks good, happy with service etc. Be sure to let them know if you're in a rush tho, good work takes time I guess...

recommended.
'97 HDJ80 - worth the wait
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: blast and powdercoat Bayswater (vic)

Post by dogbreath_48 »

Out of curiosity how much did they charge? Pm me if you wish.
Tetanus rolling on 37's
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests