Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Lift kit

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 77
Joined: Tue Jan 22, 2008 6:09 pm
Location: Newcastle

Body Lift kit

Post by suzukigav »

Hey I am going to make a 2 inch body lift for a Gq lwb patrol.
Does anyone know the length and thread of the bolts i will need to use?
Also how many blocks will i need?
What diameter should the blocks be?

Any information would be great.
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Re: Body Lift kit

Post by 5inchgq »

I used 65mm round aluminium, could have used 75mm.

You need 10 blocks for GQ lwb.
Top
Posts: 77
Joined: Tue Jan 22, 2008 6:09 pm
Location: Newcastle

Re: Body Lift kit

Post by suzukigav »

thanks for that mate,
Any chance anybody knows about the bolt diameters and lengths?
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Re: Body Lift kit

Post by BadMav »

M12x130mm, you will however need to break the captive nuts out of the very rear floor mounts. Or buy 2 of M12 x 1.25 x 130mm (metric fine thread) to suit the nuts.
Don't take life too seriously...it isn't permanent.
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Re: Body Lift kit

Post by 5inchgq »

BadMav wrote:M12x130mm, you will however need to break the captive nuts out of the very rear floor mounts. Or buy 2 of M12 x 1.25 x 130mm (metric fine thread) to suit the nuts.
I had big dramas with these captive nuts when I did mine, having no other option I cut the floor with a grinder and chiseled (sp?) the bloody things out.

Then welded the floor up.......
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Re: Body Lift kit

Post by BadMav »

ha ha yeah me too
Don't take life too seriously...it isn't permanent.
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Re: Body Lift kit

Post by Clanky »

5inchgq wrote:
BadMav wrote:M12x130mm, you will however need to break the captive nuts out of the very rear floor mounts. Or buy 2 of M12 x 1.25 x 130mm (metric fine thread) to suit the nuts.
I had big dramas with these captive nuts when I did mine, having no other option I cut the floor with a grinder and chiseled (sp?) the bloody things out.

Then welded the floor up.......
I used a holesaw and siliconed a rubber grommet back in after drilling out the captive nuts with a clearance hole. Same end result, different method :)
Top
Posts: 6
Joined: Tue Dec 22, 2009 5:46 pm
Location: queensland ipswich

Re: Body Lift kit

Post by tanked86 »

Wouldn't it be easier to jut buy 2 of M12 x 1.25 x 130mm (metric fine thread) to suit the nuts, than cut an weld...... or are the nuts too weak or something?
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Re: Body Lift kit

Post by 5inchgq »

tanked86 wrote:Wouldn't it be easier to jut buy 2 of M12 x 1.25 x 130mm (metric fine thread) to suit the nuts, than cut an weld...... or are the nuts too weak or something?
The captive nuts aren't welded to the body they are held captive by a strip of steel thats welded to the body, therefore they are prone to slipping when a good amount of force is applied to the bolt. Its hard to explain but have a look at one and you'll see what I mean. ;)
Top
Posts: 6
Joined: Tue Dec 22, 2009 5:46 pm
Location: queensland ipswich

Re: Body Lift kit

Post by tanked86 »

Just had a look understand what you mean, cheers
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 109 guests