Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tryes & Lockers

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 67
Joined: Tue Jun 22, 2004 8:12 pm
Location: Where ever I want to be

Tryes & Lockers

Post by cazook »

Is a body lift required to fit 285's (33's) to an NJ all readfy got 2" suspension lift. Also what lockers are availeble can't justify price of air lockers. All help appreciated
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

You should be able to fit 33's with a 2" Lift no worries.
Some of the other guys will probably be able to tell about lockers.

Stuart
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

re

Post by Grantw »

Locker options:

REAR: airlockers or factory (air driven)

FRONT: airlocker (manual transmssion only), detroit (custom by geelong diffs)

Hang the expense and buy airlockers.... Not that there is other options!!!
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Posts: 59
Joined: Tue May 11, 2004 4:53 pm

Post by 2HI4U »

eld the diffs??? Cheap does the job!
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

re

Post by Grantw »

I dare you to weld the front! Just carry a spare Cv or 4
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Posts: 73
Joined: Mon Jul 14, 2003 7:05 pm
Location: Concord

Post by sascot »

[I dare you to weld the front! Just carry a spare Cv or 4quote]

been runin a "BOC LOCK" now for 4 yrs. the first time i didn't do it properly and it didn't last1 yr. just cleaned er out and used the right rods the 2nd time. NO WORRIES ;) haven't broken any cv's yet but only use 4wd on the tracks when i need to. Its a cheap option and at that time airloks weren't an option. IMHO welding is fine if its right and u like 20 point turns :D [/quote]
POOJAR NF V6 33" MT's 2" bod lift & usual addons for the shopping trolley.
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

re

Post by Grantw »

And have a great navigator who unlocks and locks the hubs every few minutes....

Used to have cig lockers in a suzuki... Rear was ok but front was a PITA. Not my cup of tea for a paj... Not when there are other options.
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Posts: 134
Joined: Wed Jan 01, 2003 6:49 pm
Location: Sydney

Contact:
Contact 4runna

Post by 4runna »

That's a pretty good advertisement for Pajero CVs! I doubt My old 4runner would have taken kindly to that!


sascot wrote:[I dare you to weld the front! Just carry a spare Cv or 4quote]

been runin a "BOC LOCK" now for 4 yrs. haven't broken any cv's yet but only use 4wd on the tracks when i need to.
96 Paj 2.8 TD 2" lift, Snorkel, LR Tank, Dual Batt, winch, 32 MTRs, RT tent and rack, polyairs etc
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

But we all could have told you a Paj front end is stronger than a 'Lux. :D

Cheers,

Scott
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests