Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mid Mount Winch....Whos got one??? any info???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

Hey all, I'm looking in the future, to mount an electric winch under the tray of my LN106 Hilux.

My question is, What winches are you guys running for mid mounts?
Electric, Hydraulic, PTO?
I was thinking electric, mainly because there's a battery mounted less than half a metre away (stuff all voltage drop).
What sort of electric? (I don't drive comps, I'm just a weekend warrior who needs more approach than my current front bar will allow!) - Hi or slow mount, obviously both can be modded for speed at a later date if needed.

Any pics and advice would be much appreciated!

Cheers, Dano.
Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Re: Mid Mount Winch....Whos got one??? any info???

Post by Harb »

Mine is Mid mounted but the winch cable only goes to the rear....... got a second one on the front

sorry its the only pic I can find.....

Image

Image
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

Quick response!

LOL, cheers.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: Mid Mount Winch....Whos got one??? any info???

Post by ISUZUROVER »

Bill / Portalrover /Daddylonglegs (can't remember username) posted up pics of a landie he built with a centre mounted hi-mount. The winch faced the rear and was fed to the front via a series of pulleys. Rear winching was therefore a double line pull as you left the front connected. The vehicle owner's name was Nigel. It was featured in a mag - anybody have pics?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Re: Mid Mount Winch....Whos got one??? any info???

Post by love ke70 »

my GQ is running one
bought it off 5lt patrol on here, if you have a search there are probablu half a dozen threads i got infos from to build mine.

i was restricted as to where i could mount mine as it came with the drive shaft already, it runs the nissan PTO box on the gearbox and a 40 - 60 series toyota PTO winch.

i run the line straight, its very squeezy, between exhaust and chassis, touches chassis when the line is feeding on hard over on one side, it runs up and around a snatch block i chopped up and made fit and then it runs across under the front crossmember into the fairlead in the centre of the bar.

it was a mission but i love my PTO.

only reason i went midmount was to run much more line (70 metres i think i ended up buying), and PTO so i didnt have absolutely shite line speed without spending big dollars, and the power to turn a large diameter drum.

issues to consider

what line do you want to run, its gonna get covered in road grime, water spray, grit, exhaust/engine/gearbox heat, everything unsavoury, your line will cop it.
means you cant run plasma, or any rope really.

i ended up with 11mm 6/25 2070 grade steel core, i think thats right, and cost me a bit over 300 bucks

are you happy welding under your car, or how are you going to mount it? to the tray? would have to be some seriously serious tray mounts for me to winch off the tray

http://s29.photobucket.com/albums/c292/ ... ch%20pics/" onclick="window.open(this.href);return false;

thats my album of pics, i will have to get some finished ones up, i think it was getting late when i finished and never got any up, took me a good 12 hours or so to do it, building the cradle, then bracing the crossmembers it was mounted to etc.

its taken some serious loads, amazed i havnt broken a shear pin yet, and the whole thing is holding together well, but im gonna know about it when it hits the back of the cab :P
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

Hey KE70,

Thanks for the info, I'm more than happy to weld under the old girl, I was thinking of making a cradle to mount it off the chassis, by shapeing some flat plat to follow/cup the chassis.

I was thinking about PTO, this would be my best option, but I'm unsure as to weather or not the T/Case has provision????? ANYONE?

Thanks Isuzurover,

I did a search and found some answers, but not all the ones I was after.
I'll have a look around again tonight to see those rigs you mentioned.

Chhers, Dano.
Posts: 58
Joined: Mon Dec 07, 2009 9:56 pm
Location: Northern Territory

Re: Mid Mount Winch....Whos got one??? any info???

Post by blackarrowilly »

Hey mate.
I have the same problem with the front approach with a highmount on the front of my hilux.
I have been thinking about mid mounting it.But running the cable is a pain in the bum.
So I'm thinking about mounting the radiator behind the cab and putting the winch in its place.
From the measurement I've taken a lowmount would be easier then a highmount.
Cheers.
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Re: Mid Mount Winch....Whos got one??? any info???

Post by love ke70 »

so long as you realise welding to the chassis is a registration no no?

mines all welded to the crossmembers and tray supports, not the actual chassis

what answers are you after?
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

NOOOO, not going to weld to the chassis, I'm thinking of making something that cups the chassis and uses original bolt holes. Also incorporating bracing and what not, back to crossmembers and so forth.

Answers.....or should I say questions

Does an LN106 transfer have an output or provision for PTO?
PTO, Low or HI mount? (which I suppose despends on the first Question :roll: )
Has a Mid Mount been done in an LN106, any pics?
How many legs does a centipede really have? lol

Cheers, Dano.
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Re: Mid Mount Winch....Whos got one??? any info???

Post by bakerboy »

http://www.perth4x4.net/forum/showthread.php?t=30467" onclick="window.open(this.href);return false;

this bloke has done one, very good job of it as well
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Re: Mid Mount Winch....Whos got one??? any info???

Post by Bush65 »

ISUZUROVER wrote:Bill / Portalrover /Daddylonglegs (can't remember username) posted up pics of a landie he built with a centre mounted hi-mount. The winch faced the rear and was fed to the front via a series of pulleys. Rear winching was therefore a double line pull as you left the front connected. The vehicle owner's name was Nigel. It was featured in a mag - anybody have pics?
This pic shows how the winch was mounted in Nigels landie, and the routing of the rope.

Image
John
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

bakerboy wrote:http://www.perth4x4.net/forum/showthread.php?t=30467

this bloke has done one, very good job of it as well
It seems you need to be a member to view this page, so I've applied to register (due to not accepting gmail addresses, sigh,)

The more I think about it the easier and more practical it seems to use an electric winch, I mean no need to modify transfer case, run shafts, look for a particular type of winch.....which given the age of the 40 - 60 series ones, might need work/money spent.

Line speed is not an issue.....yet! I'm thinking get a "slow mount" and more steel cable than standard, then as the need for speed arises, then look at more/bigger motors.

Cheers, Dano.
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Re: Mid Mount Winch....Whos got one??? any info???

Post by love ke70 »

well the way i see it is most PTO winches are factory fitted and do bugger all work.
you have to use the right oil in them which doesnt effect the brass worm gear, but other than that not much goes wrong.

having not seen the thread that was linked as i cant be bothered signing up im not sure what they had to do to use the transfer to drive it, but if it can be done i suggest it.

only downside is you cant use your PTO when you roll it :P
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

love ke70 wrote:only downside is you cant use your PTO when you roll it :P
Of course you can! Just don't expect the engine to last too long without oil! :)

Cheers, Dano.
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: Mid Mount Winch....Whos got one??? any info???

Post by steel »

bakerboy wrote:http://www.perth4x4.net/forum/showthread.php?t=30467

this bloke has done one, very good job of it as well


Hey Bakerboy ;) ,,, yeah i'm the fella from the link above. I'm not real flash on the puter so i can't post pics, but if you have any questions. ( maybe one of the fellas off Perth4X4 might post some up for me)

I used an electric winch (terrain tamer) and also mounted my 2 batteries right next to the winch.

I set mine up very similar to how Bill set up Nigels. (missing Daddylonglegs these days,, legend)


Just be very careful that you don't turn your chassis into a pretzel,, the forces applied to parts of the chassis during a tough winch are incredible and the chassis may not like it. I've done alot of bracing to make sure it all stays true.

Cheers Jason
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: Mid Mount Winch....Whos got one??? any info???

Post by steel »

Sorry Dano80, i've tried again, but all i get is this

[img][IMG]http://i756.photobucket.com/albums/xx20 ... 9042-1.jpg[/img][/img]

If you really want to look at pics maybe try and join Perth4X4.net and look at my build "Steely's ute"
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Re: Mid Mount Winch....Whos got one??? any info???

Post by love ke70 »

Image

is that what you were aiming for? you had 2 sets of image quotes
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: Mid Mount Winch....Whos got one??? any info???

Post by steel »

is that what you were aiming for? you had 2 sets of image quotes[/quote]


Yeah sort of,, Dano requested as many photos as possible to help with his project,, so if you know what you're doing maybe you could post a link to my photobucket album for him :? ;)
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Re: Mid Mount Winch....Whos got one??? any info???

Post by love ke70 »

http://s756.photobucket.com/albums/xx20 ... n/?start=0" onclick="window.open(this.href);return false;

pretty sure thats the one?

looks like a few good pics in there :)
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: Mid Mount Winch....Whos got one??? any info???

Post by steel »

cheers for that mate.

Most of the winch pics are on pages 2 and 3
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Re: Mid Mount Winch....Whos got one??? any info???

Post by bru21 »

IBEX!!

http://www.pirate4x4.com/forum/showthread.php?t=501750" onclick="window.open(this.href);return false;
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 8
Joined: Wed Apr 09, 2008 1:25 pm
Location: Ayr, Qld

Re: Mid Mount Winch....Whos got one??? any info???

Post by RedRat »

I assume you've already moved the front diff forward to increase the approach angle and it's still not enough? That was the next mod I was going to make to the RedRat and it's a helluva lot easier than a midmount winch by the look of the pics (some tricky work and some hours gone into the pulley setups by the looks of it). Just a thought.
Posts: 234
Joined: Fri Jan 27, 2006 11:12 am
Location: NZ

Re: Mid Mount Winch....Whos got one??? any info???

Post by Turoa »

Heres the pics from my old beater hilux. It originally had a pulley to go from the rear x member to the winch but it kept jumping off so slapped a snatch block in there instead. Distance from the pulley to the winch was always a little short and it never would on that well but it wasnt that bad. Just played up on long winches (you would have to get out and pull the cable over slightly.

Image

Image

Image

Image

Image
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

Hey Steel,

Thanks for the pics, awesome setup!
How do you find the winch speed, especially under load, with all the rollers?

Thanks for help with the linky thing Ke70!!!

I've been away for the past few days.......

Cheers, Dano.
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Re: Mid Mount Winch....Whos got one??? any info???

Post by De-lux »

Bush65 wrote:
ISUZUROVER wrote:Bill / Portalrover /Daddylonglegs (can't remember username) posted up pics of a landie he built with a centre mounted hi-mount. The winch faced the rear and was fed to the front via a series of pulleys. Rear winching was therefore a double line pull as you left the front connected. The vehicle owner's name was Nigel. It was featured in a mag - anybody have pics?
This pic shows how the winch was mounted in Nigels landie, and the routing of the rope.

Image

offtopic: What is the deal with that suspension set up? why is there one big coil in the middle?
indubitably
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

If this is the one that was featured in 4wd Action or was it monthly back then......anyway,

I believe that the single coil was to carry the load and it had a PTO box hooked to the diff housings to force it to flex.....and the way it was setup, had minimal body roll for onroad, but looking at the tyres, it was never intended for that.
Absolute engineering marvel!!!!

There was a diagram that 4wd action/monthly (lol) used to depict this, but I can't seem to find it. If anyone has anything like the diagram or pics to explain, maybe that would make it easier understand.


Cheers, Dano.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: Mid Mount Winch....Whos got one??? any info???

Post by ISUZUROVER »

De-lux wrote:
Bush65 wrote:
ISUZUROVER wrote:Bill / Portalrover /Daddylonglegs (can't remember username) posted up pics of a landie he built with a centre mounted hi-mount. The winch faced the rear and was fed to the front via a series of pulleys. Rear winching was therefore a double line pull as you left the front connected. The vehicle owner's name was Nigel. It was featured in a mag - anybody have pics?
This pic shows how the winch was mounted in Nigels landie, and the routing of the rope.

Image

offtopic: What is the deal with that suspension set up? why is there one big coil in the middle?
Pretty much as above - the landie has "forced articulation" - the F+R axles are linked via shafts and a PTO drive, so if one axle flexes the other flexes the opposite way. This also means it has basically no body roll, so Bill's original plan was to only run a single coil at the rear for extra articulation, however it had to be changed to twin coils for engineering.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: Mid Mount Winch....Whos got one??? any info???

Post by steel »

dano80 wrote:Hey Steel,

Thanks for the pics, awesome setup!
How do you find the winch speed, especially under load, with all the rollers?

Thanks for help with the linky thing Ke70!!!

I've been away for the past few days.......

Cheers, Dano.


No worries mate, i stuck some more pics on there today showing the linkage i made to remotely actuate the freespool.

The winch speed does not change despite the multiple pulleys involved in routing the rope to the front. Speed is halved when doing a rear winch.

I hope it works out for ya.
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Re: Mid Mount Winch....Whos got one??? any info???

Post by Bush65 »

ISUZUROVER wrote:.....

Pretty much as above - the landie has "forced articulation" - the F+R axles are linked via shafts and a PTO drive, so if one axle flexes the other flexes the opposite way. This also means it has basically no body roll, so Bill's original plan was to only run a single coil at the rear for extra articulation, however it had to be changed to twin coils for engineering.
Plus it has VW torsion bar suspension used as a sway bar - can be seen in the pic.

The hybrid landie was built on a rangie chassis, and rangies of that era had a load leveller where that centre coil is and light coils outboard of the chassis. The load leveller was modified to use the coils.
John
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Re: Mid Mount Winch....Whos got one??? any info???

Post by dano80 »

steel wrote:
dano80 wrote:Hey Steel,

Thanks for the pics, awesome setup!
How do you find the winch speed, especially under load, with all the rollers?

Thanks for help with the linky thing Ke70!!!

I've been away for the past few days.......

Cheers, Dano.


No worries mate, i stuck some more pics on there today showing the linkage i made to remotely actuate the freespool.

The winch speed does not change despite the multiple pulleys involved in routing the rope to the front. Speed is halved when doing a rear winch.

I hope it works out for ya.

Hey mate, just looking through some of your pics, and noticed that you ran the cable through the chassis. How do you find this works? Does it rub on the chassis much or have you got around that another way?

Cheers, Dano.
Post Reply

Who is online

Users browsing this forum: No registered users and 124 guests