Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turning a 1hz into a 1hd

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 10
Joined: Sat Mar 19, 2011 10:39 pm

Turning a 1hz into a 1hd

Post by Gaston »

Hi all,
I have a 1hz in my hzj75 cruiser and I just bought a 1hdt, but its got a slight knocking sound in the engine. I was just wondering if anyone ever changed the pump, injectors and turbo over to a 1hz. Would it bo possible??
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Turning a 1hz into a 1hd

Post by SCANAS »

Lots of more important stuff on the 1hd that make them a far better motor bigger rods, different pistons. Spend the money and get the 1hd reco'd you won't regret it. How much was the 1hd and what condition is it in. Is it a 1hdt or ihdfte and is out of the 100 or the 79?

I'm a nosey bastard hey!
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 10
Joined: Sat Mar 19, 2011 10:39 pm

Re: Turning a 1hz into a 1hd

Post by Gaston »

Got it for helpin him change the engine, he said it was running fine before he got someone to change thehead gasket, but there's only a knock that sounds like it's comin from under the tapit cover.
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Turning a 1hz into a 1hd

Post by SCANAS »

You might be lucky and it might just be the wrong head gasket or something
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 10
Joined: Sat Mar 19, 2011 10:39 pm

Re: Turning a 1hz into a 1hd

Post by Gaston »

Would a wrong gasket make the engine knock??
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Re: Turning a 1hz into a 1hd

Post by RED60 »

Gaston wrote:Would a wrong gasket make the engine knock??
If the pistons are hitting the head yes.... it's easily worth lifting the head to see what's going on..... on second thoughts, yes it's cactus, I'll give you $100 cash for the whole thing, sight unseen.... :cool: :cool:
Show me the money..SHOW ME THE MONEY
Posts: 53
Joined: Fri Aug 06, 2010 9:01 pm
Location: on the road in W A

Re: Turning a 1hz into a 1hd

Post by old ed »

Don't fall for that .I'd give you $200
Posts: 277
Joined: Sat Nov 09, 2002 9:09 am
Location: Inverell

Re: Turning a 1hz into a 1hd

Post by MADSHORT »

your other op is to just swap over turbo and crank up fuel a bit
$300 for old crapped out motor :lol:
cheers
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Turning a 1hz into a 1hd

Post by SCANAS »

my thoughts where wrong gasket might be over pressurising it
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Turning a 1hz into a 1hd

Post by 80's_delirious »

regarding your original question, yes you could put the turbo on the 1hz with some work, its not quite bolt on.

the fuel pumps are different internally, the injection timing is different, the injection pressure is different (and the crack pressure of the injectors is too). I fitted a 1HZ pump to a 1HD-T and it would only just get it running, it was undriveable.

the injectors are not interchangeable, they are completely different design.


I would be doing some investigation on the 1HD-T for sure.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests