Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
75 series troopy auto locker
Moderators: toaddog, Elmo, DUDELUX
75 series troopy auto locker
do spartan or lockright do a rear locker for 75 series troopy [91model] it has an lsd in ,any help would be appreciated,cheers mick
Re: 75 series troopy auto locker
Yes, but you will need to take the LSD out to put the locker in.
Contact this guy, he is bringing Richmond lockers in from the states at great prices. I just got a front one delivered for for heaps less than anywhere else. http://myworld.ebay.com.au/northlakes4wdrepairs/" onclick="window.open(this.href);return false;
Contact this guy, he is bringing Richmond lockers in from the states at great prices. I just got a front one delivered for for heaps less than anywhere else. http://myworld.ebay.com.au/northlakes4wdrepairs/" onclick="window.open(this.href);return false;
BadLux wrote:Get her nice and drunk take her to the beach and root her brains out! half way through pull out dip it in the sand and ram it back in.. will sort out all your problems
Re: 75 series troopy auto locker
how hard is it to remove the lsd ??and which locker would any body recommend
Re: 75 series troopy auto locker
Take the axles out (leave wheels on if you want)
Jack car as high as the stands will allow, as you will need a bit of room to move
Climb under take the tail shaft out (put a mark on the tail shaft flange where one bolt is so you can put it back in the same holes)
Undo the 10-12 bolts that hold the centre in place
Give it a tap with a rubber mallet
Pull the centre out
Clean the face of the housing where the housing and centre meet.
And do everything above in reverse.
Should take a couple of hours at most, make sure you work out which is the upside on the new centre, so your not trying to rotate the heavy ass centre while under the car.
I recommend either an air locker if funds permit or a richmond auto locker.
Jack car as high as the stands will allow, as you will need a bit of room to move
Climb under take the tail shaft out (put a mark on the tail shaft flange where one bolt is so you can put it back in the same holes)
Undo the 10-12 bolts that hold the centre in place
Give it a tap with a rubber mallet
Pull the centre out
Clean the face of the housing where the housing and centre meet.
And do everything above in reverse.
Should take a couple of hours at most, make sure you work out which is the upside on the new centre, so your not trying to rotate the heavy ass centre while under the car.
I recommend either an air locker if funds permit or a richmond auto locker.
BadLux wrote:Get her nice and drunk take her to the beach and root her brains out! half way through pull out dip it in the sand and ram it back in.. will sort out all your problems
Re: 75 series troopy auto locker
Sorry to go off topic, does Richmond makes a LockRight to suit the LSD housing for this Toyota?
My RIG sucks big time.
Re: 75 series troopy auto locker
hi all,
i haven't heard anything about Richmond lockers before, can you give more detail? have you used them before? how do they stack up against common lockers? and can i ask what you paid
i haven't heard anything about Richmond lockers before, can you give more detail? have you used them before? how do they stack up against common lockers? and can i ask what you paid
" You can't fix it if you don't break it "
Re: 75 series troopy auto locker
Richmond makes LockRights (lunch box lockers)
Eaton (formerly Tractech) makes Detroit Lockers (the original automatic locker with its own housing).
I've only used a Lockright on a Toyota Hilux using the 2 pinion open diff housing.
I used to run a Detroit Locker on my Daihatsu Rocky.
Review:
The Lockright was really smooth with hardly any backlash.
Then one day for some odd reason the halfshaft broke.
Ever since replacing the halfshaft, the Lockright has been pretty clunky and pops and bangs on the road.
However it still works effectively when offroading.
The detroit locker seem smoother and i believe they are far stronger and more refined than the lockright.
But of late i've been hearing claims that the smoothest operating automatic locker is the Kaiser locker from Brazil.
Anyone down under tried them out yet?
Just my 2 cents.
Eaton (formerly Tractech) makes Detroit Lockers (the original automatic locker with its own housing).
I've only used a Lockright on a Toyota Hilux using the 2 pinion open diff housing.
I used to run a Detroit Locker on my Daihatsu Rocky.
Review:
The Lockright was really smooth with hardly any backlash.
Then one day for some odd reason the halfshaft broke.
Ever since replacing the halfshaft, the Lockright has been pretty clunky and pops and bangs on the road.
However it still works effectively when offroading.
The detroit locker seem smoother and i believe they are far stronger and more refined than the lockright.
But of late i've been hearing claims that the smoothest operating automatic locker is the Kaiser locker from Brazil.
Anyone down under tried them out yet?
Just my 2 cents.
My RIG sucks big time.
Re: 75 series troopy auto locker
i was led to believe richmond and detroit were the same just branded different!!
Re: 75 series troopy auto locker
I put a Richmond Powertrax in the rear of the old mans 75 series troopy and a loc-rite in the front.
The Powertrax worked sweet and was quite as, untill it stopped working and self destructed about 2 yrs later http://www.richmondgear.com/powertrax/noslip.html" onclick="window.open(this.href);return false;
The Richmond Loc-Rite just works, a bit noisey sometimes but I have had a few and never a failure.
The Powertrax worked sweet and was quite as, untill it stopped working and self destructed about 2 yrs later http://www.richmondgear.com/powertrax/noslip.html" onclick="window.open(this.href);return false;
The Richmond Loc-Rite just works, a bit noisey sometimes but I have had a few and never a failure.
GO the 80...The mods have started :-)
Who is online
Users browsing this forum: No registered users and 65 guests