Hey all, got a Gq rear diff with Arb air locker, had an air leak and replaced all the seals. Still leaking. Seems the actual carrier housing has grooves worn in it from the air delivery ring seals. Tried shimming it out to get a better seal/rubbing surface and the only place it sealed was right on the outer edge which would cause it
To fowl on the diff housing when fitted back in.
Anyone know if Arb sell over size seals for this or do they just bend u over for a new carrier?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ARB air locker, scoured carrier air leak ????
Moderators: toaddog, TWISTY, V8Patrol, Moderators
ARB air locker, scoured carrier air leak ????
Maverick LWB
4.2 deehizzle my nizzle
6" lift tough dog and thirds gear.
Good year wrangler 35s.
4.2 deehizzle my nizzle
6" lift tough dog and thirds gear.
Good year wrangler 35s.
Re: ARB air locker, scoured carrier air leak ????
just a shot but take the oring to pirtek and see if they have a thicker version of it.
turbos are nice but i'd rather be blown
Re: ARB air locker, scoured carrier air leak ????
Can you speedi sleeve the seal surface maybe??? 
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Re: ARB air locker, scoured carrier air leak ????
It's an option that I'm not keen to take lol. A last resort. Cos getting the air pilot hole drilled in the exact position in the sleeve to suit the original surface would be the job of highly skilled machine shop. And probly cost similar dollars to a new carrier. But over sized seals would be awesomeWilly Hilux wrote:Can you speedi sleeve the seal surface maybe???
Maverick LWB
4.2 deehizzle my nizzle
6" lift tough dog and thirds gear.
Good year wrangler 35s.
4.2 deehizzle my nizzle
6" lift tough dog and thirds gear.
Good year wrangler 35s.
Who is online
Users browsing this forum: No registered users and 3 guests