Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

soa shocks and engine swap ???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

soa shocks and engine swap ???

Post by sledheadak »

what size of shocks are need after doing a soa on a 81 patrol lwb?compressed and extended.i have a ford 351m engine and 4 sp,has anyone installed one of these engines in a patrol?? if so what problems have you run into? thanks
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

shocks

Post by DR Frankenstine »

I had a 351 in my old LWB and had no problems (appart from fuel consumption) I wouldn't do a spoa on a LWB as for some reason they have a lot more body roll (when lifted) than a shorty.
Top
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

Post by sledheadak »

mine is going to be a trailer queen seeing as i can not regester it here in the us yet-but am working on that-so body roll is not a concern.which 351 did you use? ford made 2 different ones.mine is a M not a windser
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

sledheadak wrote:mine is going to be a trailer queen seeing as i can not regester it here in the us yet-but am working on that-so body roll is not a concern.which 351 did you use? ford made 2 different ones.mine is a M not a windser


Is an M the same as a Cleveland?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

Post by sledheadak »

it is close in size but is a different engine.it has the same bellhousing pattern as the 429-460 engines.
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

351M is a de-stroked 400M

have a read of this...

http://home.earthlink.net/~bubbaf250/hi ... ory03.html
Top
Posts: 110
Joined: Sun Jul 04, 2004 7:22 pm
Location: Strathpine

Post by 84SwbPatrol »

ok guys i gota ask and i know im gunna kik myself when ya tell me but what the hell does spoa stand for? :oops:
Top
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

Post by sledheadak »

spring over axle spoa or soa are the short terms for it. what lenght shocks do i need after the soa is done????
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

when you finish the SPOA, ramp it and measure the distances, (compressed and extended)

this will give you all the info you need to buy shocks.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

84SwbPatrol wrote:ok guys i gota ask and i know im gunna kik myself when ya tell me but what the hell does spoa stand for? :oops:


Fair question I reckon, because even thought I know what it means, I am fucked if I know what the "P" stands for.

Jason
This is not legal advice.
Top
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

Post by sledheadak »

man i that sounds like too much work,i just wanted a ready made answer lol j/k figured i would have to do that.only problem is that the mq patrol was never sold here and i get a stupid look when i ask about parts for it.was hopeing somebody had a rancho part number or trailmaster number that i could have them order.
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

sledheadak wrote:man i that sounds like too much work,i just wanted a ready made answer lol j/k figured i would have to do that.only problem is that the mq patrol was never sold here and i get a stupid look when i ask about parts for it.was hopeing somebody had a rancho part number or trailmaster number that i could have them order.


once you have your measurments, the ranchos wont be hard to get. just specify eye or pin mountings. and your done.

there wont be any ready made answer because it all depends how old the springs are/how youve set it up/and lots of other factors.

it gives you a good opportunity to ramp it and take photos for us too ;)
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 111 guests