Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6bt 350hp injector pump on td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 7
Joined: Thu Jul 22, 2010 1:26 pm

6bt 350hp injector pump on td42

Post by whardes »

I have been doing some research and found the only difference between the 6bt injector pump and the td42 pump is the drive shaft is 20mm and not 17mm like the patrol pump which any good fitter and turner could machine out. and the govenour housing is the other way round as on the 6bt the pump is on the oposite side of engine compared to the td42 but the housings are interchangable ive got a 6bt pump and sat it next to my patrol pump and its indendtical has any one else done this conversion or done and research as a brand new 6bt turbo pump is only 1200 compared to getting my pump done up for 3000. cheers
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Re: 6bt 350hp injector pump on td42

Post by nastytroll »

I had thought about it, but I left tht job before I had any real time to do and measuring.
Posts: 7
Joined: Thu Jul 22, 2010 1:26 pm

Re: 6bt 350hp injector pump on td42

Post by whardes »

got a 6bt pump today sat it next to my gq pump and only thing u can tell by eye is the govenour housing have swapped it over already was very easy and have a mate machining out the drive gear so all should be good to go by friday
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Re: 6bt 350hp injector pump on td42

Post by nastytroll »

Keep the details comming please.
Posts: 248
Joined: Fri Jan 16, 2009 12:48 pm
Location: Sth Wst QLD

Re: 6bt 350hp injector pump on td42

Post by 300WinMag »

Where did you get it?

What size plunger dose it have?
26 PSI 88 SWB TD 42 W/A IC
Posts: 7
Joined: Thu Jul 22, 2010 1:26 pm

Re: 6bt 350hp injector pump on td42

Post by whardes »

as far as i know its a 13mm plunger with 4mm delievery vales and rated up to 350hp will keep updated
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Re: 6bt 350hp injector pump on td42

Post by Dzltec »

Got a part number off this pump or a description number number ie ve6/this helps to tell me a good parts description. I think you may suffer from max revs issues.

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Re: 6bt 350hp injector pump on td42

Post by nastytroll »

Dzltec wrote:Got a part number off this pump or a description number number ie ve6/this helps to tell me a good parts description. I think you may suffer from max revs issues.

Andy
Part number I have is 0 460 426 142, 3917002 Bosch. From a 12 valve 177kw 5.9l 6BTAC
Posts: 7
Joined: Thu Jul 22, 2010 1:26 pm

Re: 6bt 350hp injector pump on td42

Post by whardes »

ive been called out to work so cant get numbers till i get back my mate got his started today and he said his revs out about 500rpm more then it used to and it flys runs much cooler then his old maxxed out standard pump even though he is running 25psi through a gt35r he is gonna put it on the dyno in the morning and check vitals put he said lot less soot earlier boost and feels way torquey then it ever has and better fuel economy
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Re: 6bt 350hp injector pump on td42

Post by tye1986 »

Low down boost with a gt35 he's dreaming.
gq coil cab with stuff
Posts: 232
Joined: Sat Dec 05, 2009 6:33 am
Location: BUNDY

Re: 6bt 350hp injector pump on td42

Post by RIZZO »

what exactly do these 6bt pumps come off ? what vehicle
Posts: 155
Joined: Wed Dec 20, 2006 12:11 pm
Location: Rockhampton

Re: 6bt 350hp injector pump on td42

Post by sswaffie »

It's a 12mm Plunger

And like andy said it wont rev enough to do what you want
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Re: 6bt 350hp injector pump on td42

Post by Dzltec »

And by the looks of the description it spins anti clockwise. No good for you, you need a clockwise spinning pump.



Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Re: 6bt 350hp injector pump on td42

Post by nastytroll »

RIZZO wrote:what exactly do these 6bt pumps come off ? what vehicle
Cummins 6BTA diesel engine, the pump I listed is in a UDR650 exploration drill rig running a hydraulic pump group. I don't have a pump, just wrote the number down.
Posts: 39
Joined: Thu Jan 13, 2011 10:31 pm

Re: 6bt 350hp injector pump on td42

Post by Signature »

I work for Cummins. If anyone would like some measurements I'm happy to grab them for you, however I don't know how successful a conversion would be.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests