Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Warn High mount question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Warn High mount question

Post by Screwy »

Gday guys,

Ive had a Warn high mount sitting in the shed for awhile not doing anything and im looking to sell it.

Problem is that i have no idea what Pound it is.... 8000, 9000, 10000 pound etc etc

I have the numbers off the compliance plate on the motor, but thats all the detail thats on it. Ive googled the numbers with no major luck....

Was wondering if anyone on here knows what these numbers means as far as size of this winch or how to find out?

Warn Series Wound Power

M 26626
N MRV-B-4
V 12
D 465

Any Help would be great.

cheers

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: Warn High mount question

Post by dogbreath_48 »

AFAIK all warn high mounts are rated to 8000lb.

Motors were almost the only thing that changed (from 2.5 to 4.6hp iirc). If your motor doesn't have the big heatsink-ish endcap then it's probably a 2.5.
Tetanus rolling on 37's
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: Warn High mount question

Post by turps »

All I found in a quick look was a Warn Bellbird reference.
There are a number of changes to the Himount over the years. I also think the design is not a warn design. They just brought it and sold it as there own.
Early himounts at no free spool, think most of these had either 2hp 12v or 24v. Then there was a round free spool handle. From memory these had 2.2hp (great motor apparently) and 2.5hp (another great motor).
Then the free spool upgraded to a T handle and it got a 4.6hp motor (no where near as good as the older ones).

I dont know what else was different. Other than Toyota made there own with really slow gearing. And Gigglepin make a really expensive copy.
THOUGHT FOR THE DAY....
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Re: Warn High mount question

Post by ToNkA »

Post a pic of it, the differences between them are usually easy to see...
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

So they are all 8000 pound winches no matter what? ill post a pic to see what motor i have....
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

pic of the winch.............

Does it help at all?

cheers
You do not have the required permissions to view the files attached to this post.
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Re: Warn High mount question

Post by mickyd555 »

need a pic of the whole winch motor to be sure but it looks like a 4.6HP, the sticker on the motor should have details on it but given that the sticker is still on it i am assuming its the newer 4.6.
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

the sticker on it says the stuff that i wrote on the first post

pic of the sticker............

So is it definately a 8000 pound or is it something else?
You do not have the required permissions to view the files attached to this post.
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

Re: Warn High mount question

Post by micka1 »

their all 8000 pound .
they just have different hp motors - 2.5 , 4.6 etc etc
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Re: Warn High mount question

Post by turbo gu »

Its a 8000 pound 8274 high mount. rebuild it and throw on a 6hp motor and your good to go!!
There is a serial number stamped in top section and you can look that up on the warn site for what seal kit etc you need
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

K sweet as............ so now im just wondering what this one is so i can put it on ebay lol
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

turbo gu wrote:Its a 8000 pound 8274 high mount. rebuild it and throw on a 6hp motor and your good to go!!
There is a serial number stamped in top section and you can look that up on the warn site for what seal kit etc you need
what horse power is the motor now?
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Re: Warn High mount question

Post by turbo gu »

going by the numbers it would be a 4.6hp
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

sweet thanks mate
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 1508
Joined: Fri Aug 15, 2008 10:45 am
Location: gladstone qld

Re: Warn High mount question

Post by Mosko111 »

Will give you $550 for it and you can keep the motor for a door stop!
Deal??
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Re: Warn High mount question

Post by ToNkA »

Mosko111 wrote:Will give you $550 for it and you can keep the motor for a door stop!
Deal??
$551
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 1508
Joined: Fri Aug 15, 2008 10:45 am
Location: gladstone qld

Re: Warn High mount question

Post by Mosko111 »

$575 you keep the motor, I give you a rake with a broken handle, can of peaches with a 1999 expiry date, and a 6 month subscription to dolly doctor!
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

Mosko111 wrote:Will give you $550 for it and you can keep the motor for a door stop!
Deal??
If your serious its yours lol.

Im putting it on ebay today
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Warn High mount question

Post by Screwy »

if anyone actually wants it before i put it on ebay ring me on 0406 4222 17. its going on ebay tonight
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Re: Warn High mount question

Post by Clanky »

Screwy wrote:if anyone actually wants it before i put it on ebay ring me on 0406 4222 17. its going on ebay tonight
some guy is asking in the "wanted" section
Posts: 1508
Joined: Fri Aug 15, 2008 10:45 am
Location: gladstone qld

Re: Warn High mount question

Post by Mosko111 »

It's already gone guys, will be on it's way to Gladstone next week :D
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Re: Warn High mount question

Post by Clanky »

Mosko111 wrote:It's already gone guys, will be on it's way to Gladstone next week :D
Awww I have been rummaging the shed for a spare high mount just to get my hands on that rake with the broken handle!
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Re: Warn High mount question

Post by sprungupcruiser »

Prick mosko, whats wrong with your winch. Let me have it so I can build it up.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Posts: 1508
Joined: Fri Aug 15, 2008 10:45 am
Location: gladstone qld

Re: Warn High mount question

Post by Mosko111 »

Haha isn't for ne mate, I've already got myself the two crazy eyes freespooled winches to use in comps, this ones for Paul in the blue rangie, as for what's happening to it: triple motors, 250% ratios ha P.S I'm not joking!ve been discussed :lol:
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Re: Warn High mount question

Post by sprungupcruiser »

Cool! I don't need a winch anyway.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest