Hi my glow plug controler on my hj47 2H engine has died and i put a manual control button in which in turn has burnt out my glow plugs, wat have others done to overcome this problem, can i fit higher rated glow plugs as these were 6 volt ones
thanks Shane Mulcahy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hj47 glow plug issue
Moderators: toaddog, Elmo, DUDELUX
Re: hj47 glow plug issue
my old man just put in a spring loaded toggle switch in his truck has been trouble free for over a year now ..
Re: hj47 glow plug issue
Put a push switch or the like on it and on'y glow it for about 2-5 seconds.
I'd rather be biologically honest, than politically correct.
Re: hj47 glow plug issue
you must only glow for about 3 seconds at 12volt or you melt the glow plugs.
03 HDJ100R GXL / 94 FJ45-80
Re: hj47 glow plug issue
Later 2H has 12V (well 11V) glow plugs, if you have it hooked up to a manual switch you should be able to fit these so you dont melt them. Just make sure you use a heavy relay wit the switch, otherwise the switch will burn out in no time.
The old Luxy was fun, but with a young family comes great responsibility.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
Who is online
Users browsing this forum: No registered users and 1 guest