Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Weber install/ How to.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 524
Joined: Thu Apr 28, 2005 10:54 am
Location: (rushcreek) north brisbane

Weber install/ How to.

Post by bigmick »

HI al,
Not sure if this is wanted but thought id put it up.

Well today i was having a few more troubles with the idle on my carbie, Its all ready had a kit put through it so pulled it off to unblock the idle jet and give it a once over. It was pretty shaged bit of throttle shaft play and heap of (AWSOME) mods by the previous 500 owners.

So a quick search on the net and found a carbie place just down the road. went down and had a extended chat with the ins and outs and a heap of different options available. I really just wanted something easy to tune was pretty much bolt on and could get me going ASAP. EFI was an option but i just didn't have the time.
Here is a link to the weber i bought. http://www.thecarbyshop.net.au/latest-news
MIchael the owner was great to deal with and very helpful he has purchased all of these webers NOS from the us, If you want more info just give him a call.

Ok so ill throw some pics up and show every one the process took about 2 hours all up.
Tools:
spanners
Hamer
Tig welder/Glue.
Grinder/dremal with cut off wheels.
scribe
ruler
Stanley knife


Got over this pretty fast
Image

This is the kit i Picked up from the shop as it come.
Image

first of all I took the 2 space/adaptor plates off the bottom of the carbie. and pulled them apart. they were all ready marked for me by the shop.
Image

Next i got the original space place that sits on the inlet manifold and using a flat blade screw driver i bevelled the edges of the whole i could sit in the lead ball provided.
Image

Using the lead ball provided i filled the hole in the original plate by simply sitting the ball in the whole and lightly tapping it with a ball pean hammer until it was nice and flat had to work it into the hole a little but with the ball but was pretty straight forward. then i cut off the excess lead with a stanley knife blade.
Image

I then put down a gaskit then the original base plate then gaskit then the first of the 2 spacer/adaptor plates from the kit and bolted it into place.
Image

Then i bolted on the second adaptor and locktighted it in place.
Image

Then bolted carbie new throttle cable mount on,

I then bolted the template piece onto the original hat as seen in the first picture making sure that i marked the centre line and the position that it needed to be in so that it lines up with the original airbox. once i was happy with how it was i scribed around the template.
Image

Then got the grinder out and started to hack away, it would be alot easier with a dremal or 2inch cut off air tool.
Image

checking the size f the new hat adaptor, still needed to trim a bit more.
Image

Got it to where i wanted it.
Image

Then went into worlds smallest work shop and started to put the new adaptor ring on.
This helps..
Image

Owner of the carbie shop doesn't weld his on and uses a compound to stick them on cant remember what it was called.

all welded on.
Image

Then using the threaded rod supplied with the adaptor i fitted the modified hat and then cut down the threaded rod to the correct size.
Image

Then refitted 2 the vac advance hose and the vacume hose that goes to your canister. Blocked off the old choke water hoses and the other vacuum hoses.
Fitted up fuel hose and throttle cable.
Image

Gave it 2 pumps and turned it over started straight away and sat perfectly on idle. pompoms pompoms pompoms Armsup Armsup

So i thought id better take it out for a drive and wow what a difference midrange pull is so much more and the power improvement is great.
I have heard all the stories about webers on angles but i was assured that the DFT Weber didn't have these problems so i took it out and tried it out on some angles and inclines and could not fault it.
It was not an easy decision to go with the new option (cause im a tight arse) but im very happy that i did it.

Mods just delete this if its not wanted or in the wrong place.

Cheers
Mick
zook
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: Weber install/ How to.

Post by SierraDan »

1. Take Weber
2. Put in Bin
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Re: Weber install/ How to.

Post by built4thrashing »

maybe add this to the end of the best existing weber thread on Outers..........


http://www.outerlimits4x4.com/viewtopic ... ng#p351595" onclick="window.open(this.href);return false;
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests