hey guys I've blown up the motor in my cruiser... well its done a crank and needs to be replaced..
I've been offered a 1HDT-FT complete brand new in a box.. including turbo, manifold, pump, injectors ,starter, alternator, everything ready to drop in.. all 100% BRAND NEW..
what's the motor worth to buy.. he wants 15 grand.. but to rebuild my 1HZ and turbo it and do fuel pump to suit the turbo is going to cost close to 11 or 12 grand
Regards Cohen
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1HDT-FT question
Moderators: toaddog, Elmo, DUDELUX
1HDT-FT question
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: 1HDT-FT question
2nd hand ones at the wreckers with a few kms..
around 10 to 12g.
you could do a mongrel hybrid of 1hdt and 1hz
but cost wise..
the new crate motor might be better option.
id imagine no warranty offered..
how long its been sitting in the box..
does this affect long term reliability
around 10 to 12g.
you could do a mongrel hybrid of 1hdt and 1hz
but cost wise..
the new crate motor might be better option.
id imagine no warranty offered..
how long its been sitting in the box..
does this affect long term reliability
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
Re: 1HDT-FT question
There have been import FTE engines on sale for 8k of late, probably similar or less for a FT
So a rebuilt(crate engine) should be about 5-6k on top of that realistically. I wouldn't pay 15k for a FT, a few grand less at least. I know the FT is a great engine and the FTE i have is even better, BUT ..........
They have been overpriced for years. Considering the cost of wrecked at auction 1VD engine'd vehicles, or the cost of gettng 6BT cummins's and Duramax's at 10 or less for an entire front cut there's NO WAY i'd pay that much for an old skool 6 pot any more. I don't care if every man and his dog THINKS that's what they should be getting for them that's the truth. These days a rebuilt 6pot jap engine should only be worth a few grand more than it's rebuild cost. Period. Just like any other 10-15 year old engine from any other car out there
So a rebuilt(crate engine) should be about 5-6k on top of that realistically. I wouldn't pay 15k for a FT, a few grand less at least. I know the FT is a great engine and the FTE i have is even better, BUT ..........
They have been overpriced for years. Considering the cost of wrecked at auction 1VD engine'd vehicles, or the cost of gettng 6BT cummins's and Duramax's at 10 or less for an entire front cut there's NO WAY i'd pay that much for an old skool 6 pot any more. I don't care if every man and his dog THINKS that's what they should be getting for them that's the truth. These days a rebuilt 6pot jap engine should only be worth a few grand more than it's rebuild cost. Period. Just like any other 10-15 year old engine from any other car out there
http://www.populationparty.org.au/
Who is online
Users browsing this forum: No registered users and 0 guests