Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Steering Box on GQ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 134
Joined: Tue Jul 22, 2003 9:34 am
Location: Wollongong, NSW

GU Steering Box on GQ?

Post by John H »

Howdy all, How much modification is required to fit a GU steering box onto a GQ. I know that the pitman arm is a different shape (this doesn’t bother me) but is the taper for the tie rod different? Does it use the same mounts for the chassis and steering column? Anyone’s previous experience would be appreciated.
As soon as it was made idiot proof, someone went and designed a better idiot.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

I think you need a different steering arm as well. AS the GU one is longer and has different tie rod ends(TRE). A while ago there was the parts list from Mal Leslie engineering posted which listed a GQ/ with GU stuff steering arm.

But then again this may have just been for those that have fitted complete GU axles.
THOUGHT FOR THE DAY....
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

use the GU pitman arm (have the taper reversed), run some new crush tubes through the chassis (mounting pattern is different), hook up fluid lines and column and off you go.
Top
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

If you're going to do this mod, you may want to fit an oil cooler for the power steering as the power steer fluid still boils when working it hard.

Cheers
Mitch
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

what is the advantage of doing this. heard of a few gettin done but never heard of the reason why. is it stronger, bigger fluid capacity etc

cheers

bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

I fit them all the time, The steering box bolts straight up to the original holes 1 for 1 but the tie rod taper is diferent and on a GQ the tierods point one up and one down but on a GU both point down. The original tierods are welded in but we do one of two things,1/ make an arm with a GQ tierod one end and a GU the other or taper ream out the pitman arm to suit a GQ taper, advantages are the GQ tierods are larger. :D
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

cheezy, is there a couple different spec GU boxes?
the one that i have fitted to a friends car would not bolt straight up to the original holes. the bolt spacing was the same, but the box wasn't even close to lining up with the holes when sitting snug against the chassis rail, kinda had to be twisted a bit and sit a bit lower, which was impossible.
Top
Posts: 845
Joined: Sun Nov 16, 2003 7:04 pm
Location: sydney , australia

Contact:
Contact hotrod4x4

Post by hotrod4x4 »

yeh i compared / measure a gu one up for my patrol / mav , and it was a diff pattern also....or from memory atleast diff spacing

either way it didnt just bolt up
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

I will look into it as I have another 12 GU steering boxes on the way ATM. I will keep you informed. :)
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

still want to know what the benefit is

cheers

bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

bru21 wrote:still want to know what the benefit is

cheers

bru


they are just a bigger, stronger box.
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

anyone know which model gu box is a bolton to a gq? the chassie that is not the tierod
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests