Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tried this today it didn't do anything.moved one way changed 2kph,the other way it sat at 20 kph parked. i think it is a zero adjuster not for calibrating speed.check your speed with a car with an accurate speedo or get a corection box made up.
ive just calibrated my speedo for 31tyres. Its not perfect but very close. I have done this by adjusting the two tabs and by phisically turning the spring on the center pin. i set it to the rpm's at 60km/h in 3rd gear. (about 3000rpm with 31's in 90 wt sierra) doubt if it can be done with 33 coz i almost run out of adjustment.
in the pic in the link you can see another round hole in the plastic and there is another metal adjuster.
best thing to do is get another dash and have a play. thats what i did and now my odometer is on 000057km
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
