Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.6 EFI Conversion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

1.6 EFI Conversion

Post by 85zook »

I have decided to convert my zook to the 1.6 EFI motor. What EXACTLY is required for the conversion??

1. Do the engine mounts need to be modified?
2. Where can i get an adaptor plate to the sierra gearbox?
3. How much am I looking at to install, including wiring?
4. Is an engineers certificate required and how hard is it to get if so?
5. Is it road legal with the standard sierra driveline, brakes etc?
Top
Posts: 333
Joined: Thu Apr 24, 2003 3:10 pm
Location: Cairns, effenque

Re: 1.6 EFI Conversion

Post by mike »

85zook wrote:I have decided to convert my zook to the 1.6 EFI motor. What EXACTLY is required for the conversion??


85zook wrote:1. Do the engine mounts need to be modified?

Yes but minor available in kit from RRO
85zook wrote:2. Where can i get an adaptor plate to the sierra gearbox?

I got mine from RRO in the USA Suzisportz also sell one.
85zook wrote:3. How much am I looking at to install, including wiring?

Budget 3-5k + motor and you'll be Ok, this can vary widely depending on how much work you do yourself and how complete your motor is. Mine was the upper limit of that + a bit and I was fleeced. I recommend if not doing yourself find a workshop who has done them before. I believe Suzisport have a wiring loom for this conversion
85zook wrote:4. Is an engineers certificate required and how hard is it to get if so?

Yes, have it done by the workshop as part of the job if going that way, If doing yourself, find an engineer and ask what he'll want
85zook wrote:5. Is it road legal with the standard sierra driveline, brakes etc?

Yes
If it's already been thought of...
There has to be a better way...
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest