Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ/GQ Nissan

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 83
Joined: Mon Dec 30, 2002 11:17 am
Location: Townsville, Qld, Australia

MQ/GQ Nissan

Post by qten »

Hi All,

I'm looking at buying either a Zuk or an Nissan SWB, My problem is i'm not sure which one to go for.

The Nissan has a couple of +'s that come to mind,

My main question is what kind of money would i be able to pickup say
an MQ and what kind of things should i look out for any help would be excellent.

Also what kind of costs and or problems would there be running either 33" x 10.5 or 11.5/12.5 vs 35" x 10.5/11.5/12.5?? :twisted:

I'm also looking at lockers front & rear does anyone run lockrights or are ARB's the go :?:

Thanks all,
Quenten :)
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Post by lyall »

look for rust around the front just behind the grill and next to the radiator, it can be hard to spot but when you find it it can be bad!!!

The susppension on mine has started to sag but it's not to bad.

Look for cracks on the air filter casing at the mounting points.

I'm about to fit 33" tyres and have been told they will be no problem.

I have had really no other problems with my diesel and i'm about to click over to 400,000 km.

You won't be disapointed.

Lyall
Wanted: MQ ute body
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

You should be able to pick up an MQ shorty from around $2500 up , depending on condition.

33's will fit with about 2" lift no probs but 35's will require a bit of guard cutting.

Not to sure about lockrites in the MQ's but i'm running f & r arb's and have had no probs at all :D
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

ShortyMQ wrote:You should be able to pick up an MQ shorty from around $2500 up , depending on condition.

33's will fit with about 2" lift no probs but 35's will require a bit of guard cutting.

Not to sure about lockrites in the MQ's but i'm running f & r arb's and have had no probs at all :D


With a 2 inch body lift and a 2 inch suspension lift, you should only have to trim the rear guards very slightly to prevent rubbing.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 83
Joined: Mon Dec 30, 2002 11:17 am
Location: Townsville, Qld, Australia

Post by qten »

Hi All

Thanks for your replys sounds great, few more Q's :P

Does anyone know what year models are better vs older etc?

i'm looking at a diesel probably what about them vs turboed diesel models etc?

Whats the stock gearing like do the Transfer cases do a 1:1 in high range or are they like the zuk's i think its a 1:1.5/2 or something?

Whats gears worth + rockhoppers for these beasts?

Thanks So Far, :twisted:
Quenten
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Post by lyall »

ive got a diesel with no turbo and it has more than enough power but the turbo would be a bonus. definately try and get a five speed, the four will to 120km/h on the freeway but it is screamin for a fifth gear.

don't know the gearing but 2nd lowrange gets me out of almost anything.

Go the deisel
Wanted: MQ ute body
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

qten wrote:Hi All

Thanks for your replys sounds great, few more Q's :P

Does anyone know what year models are better vs older etc?

i'm looking at a diesel probably what about them vs turboed diesel models etc?

Whats the stock gearing like do the Transfer cases do a 1:1 in high range or are they like the zuk's i think its a 1:1.5/2 or something?

Whats gears worth + rockhoppers for these beasts?

Thanks So Far, :twisted:
Quenten


Gearing in the transfer case of an MK/Q is 1:1 high range and either 2.074:1 or 2.22:1 in low range. And AFAIK you can't get rockhopper gears for these cases.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

If you can get a turbo diesel go for it.All you have to do to get them going better is big exhaust, shorten the rod on the wastegate and wind up the pump and they go pretty good.

Unfotunately no-one does any lower transfer gearing for them as they are a chain driven transfer,but a place called Diff Lapping in brisbane used to sell 4:88 diff gears for them but i don't know if they still do them or not.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests