Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Australian Land Rover parts suppliers, who are the cheapest?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 148
Joined: Tue Dec 03, 2002 9:03 am
Location: Blue Mountains, Sydney

Australian Land Rover parts suppliers, who are the cheapest?

Post by stephen »

General maintenance stuff, bushes, seals, bearings, clutch kits etc etc. I looked at the Paddockspares.com site after hearing good reports from a few people in Australia that had bought from them, and the difference in price to what at least I pay here is pretty huge including conversion and shipping.
Who are the cheapest Land Rover parts suppliers is Australia :?:
Who do people here use :?:

Thanks
Stephen
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

british4x4-melb.
landrangerspares-adel.
tooraktractor-melb.
fred smith automotive-melb.
landrover dealers, ulr and mlr-melb.
david
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

FWD motors in Fairfield Rd Fairfield, Brisbane are the importers for most LR parts coming into Australia, and supply almost all the other LR parts places (including dealers with series LR parts). They sell retail and will ship anywhere.

However, the price changes depending on who you talk to there, and sometimes the cheap aftermerket series parts (many parts not available genuine anymore) can be pretty poor quality. They stock genuine parts, but generally only when an aftermarket one isn't available or is lower quality than the genuine item.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 45
Joined: Tue Aug 03, 2004 7:39 pm
Location: 2204

Post by one_iota »

Try Karcraft in Silverwater (Sydney) also. No personal experience but some good reports from the AULRO forum.
95 3dr 300Tdi Disco,

white, snorkelled, lifted and dash curled.
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

Rovacraft in WA, I know he's on the othert side of the country, but he's always shipping stuff all over Australia. Dave's bringing seatainers of gear in every second month.
I got all my gear from him when I rebuilt my Rangy & cheap.
He can usually give u a choice of at least 3 different aftermarket & of course landrover options on any given part.
I allways chose middle of the road [price ] when faced with that choice & my rangy's still goin strong, 4 years later.
Matter of fact the only factory part I fitted was the clutch.
Top
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

BMI at Mulgrave NSW seem to be pretty keen on price and have a huge inventory.

I phoned them this morning about price and availability on TDi coolant expansion tank, pt. # PCF101590.
They only have 500 in stock. :shock:

I tend to buy mainly through Clive at Genpart, Mona Vale. Great service.


Rick.
300Tdi Defender 130 CC
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests