Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Camber & Castor Adjuster Kits for a 1994 HZJ 75

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 15
Joined: Mon Aug 23, 2004 1:39 pm

Camber & Castor Adjuster Kits for a 1994 HZJ 75

Post by slr1968 »

Does anyone know where I can buy a Camber & Castor Adjuster kit. It is for a 1994 HZJ75. Also what is the best kit around as I know there are a few different types available and what kits is the most cost effective.

Thanks Sean
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

Hey mate,
Camber is pretty well a non adjustable item in these things unless you spend mega. Usually not a prob anyway.

Most spring places sell caster wedges for under the spring packs but just depends on how much ya need.

I think one of the biggest off the shelf type ones is about 5MM on the thick end.
I remember welding a couple of these together in the day! :roll:
Top
Posts: 15
Joined: Mon Aug 23, 2004 1:39 pm

Post by slr1968 »

You can buy kits and they dont cost that much. I have seen some of them advertised for around $300 but I didn’t keep the mag they were advertised in. The ones I have seen work using a concentric bearing or bolt to adjust the camber & castor of each wheel. Has anyone seen these advertised?
Sean
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

yes they have been advertised, try kmac, the wont be much dearer than a normal set of knuckle bearings..
may i ask why u need these/?, is ur diff bent?
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

http://store.snakeracing.com.au/cache/h ... l?cache=no

;)
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

may i ask why u need these/?, is ur diff bent?


That is what I was getting at.
Castor is usually much more important and because camber is not easily adjustable it is not often done. Not normally necessary.

Anyway hope ya find what you are looking for.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest