Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

opening spring clamps

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 36
Joined: Mon Sep 06, 2004 10:43 pm
Location: fremantle west oz

opening spring clamps

Post by bumpy »

Hey Guys,

I want to open up the clamps of my leaf springs on my 40....

I have a full spring pack at the mo..

On the rear: can the clamps on both sides of the centre bolt be opened without introducing axel wrap. the leafs are quite stiff... but I have a 351...

On the front: will opening up the clamps effect the cars steering...

Thanks....I did try a search but it was taking too long to get thru all the hits... :)
Brendon...
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

they'll just walk (move side to side)
www.bolsys.com.au
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Post by pcman »

just get longer ones rivited onto the springs only cost a few bux at a spring joint or there easy enough to do yourself with some steel and a hammer
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests