Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux gearbox final drive ratio???

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Hilux gearbox final drive ratio???

Post by tomsoffroad »

Can anyone tell me what the gear ratios in the w56 5 spd and the g51 4 spd?
Looking at putting a 4 spd in the Surf as the 5spd sounds like it is about to shit itself.
I'm running 35's with 5.29:1 diffs and would like some lower gearing.

Cheers
Thomas
Where the f#@k did that come from
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Hilux gearbox final drive ratio???

Post by toyrex »

overdrive on the W56 is the same as the G52 14% or 0.87
Last edited by toyrex on Wed Nov 10, 2004 10:04 am, edited 1 time in total.
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Cheers for that :D
Where the f#@k did that come from
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

Look at the Dellows site for most of the Toyota box ratios (page 3 onward):

http://www.dellowauto.com.au/catalogue/ ... motive.pdf

Seems most of the 5 spd boxes have 0.85 final gearing, however if you are looking for a low first gear ratio, the W59 has 3.95 ratio, and pretty sure the R154 (big case Supra box) was similar.

Josh.
Top
Posts: 65
Joined: Fri May 07, 2004 12:12 pm

Post by PSI3y »

another good site for toyota gearbox ratios is http://www4.tpgi.com.au/users/loats/tec ... boxes.html
Top
Posts: 52
Joined: Fri Jan 03, 2003 3:01 pm
Location: Sydney

Post by JohnJohn »

Check the length of the 4 speed box it may be shorter and you will then have to change drive shaft lengths.
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

JohnJohn
Posted: Thu Nov 11, 2004 9:38 pm

--------------------------------------------------------------------------------

Check the length of the 4 speed box it may be shorter and you will then have to change drive shaft lengths.


They appear to be the same casing :)
Where the f#@k did that come from
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

I have a 5spd G52 that I fitted the 4.31 1st gear into instead of the standard 3.96 1st gear

Adrian
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

toyrex
Posted: Fri Nov 12, 2004 9:15 pm

--------------------------------------------------------------------------------

I have a 5spd G52 that I fitted the 4.31 1st gear into instead of the standard 3.96 1st gear

Adrian


Where did you get the cog from?
Where the f#@k did that come from
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

I have found a couple of f these odd combos in Japan
G52 with 4.31 1st gear with the standard 14% overdrive also
G52 with 28% over drive
I have one of these in my old Hilux with a 4.3 litre Chev V6 in it

Adrian
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests