Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just wanted to know what is an acceptable Oil consumption for a TD42 Non Turbo.
Last night I topped up my oil, managed to get in 3/4 Litre after 2500 k's since last change, this seems a little excessive to me
Also, what is an acceptable minimum oil pressure at idle when hot, in the Gregorys manual it states 11 PSI, I usually retain about 16 - 20 (mechanical gauge), but I was reading an older thread and someone suggested any less than 25 PSI is death !!!
my td42 burns maybe .2 or .3 around town and cruising on the high over 5000km but if i flog f&*%$ out of it driving lot of steep hill it will go off the stick in 3000km i think it is to do with what angle u drive alot of hills it burns it off on the number 5,6 cylinders
