Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series body lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 125
Joined: Fri Jan 02, 2004 3:38 pm
Location: perth - for the time being, Leaving when I can afford it

60 series body lift

Post by Birlo »

I'm doing a body lift for my 60
Just wondering wether every bolt can be assumed the same and extended 2 inches
Or if I would have to measure every one...
Any replies would be good...
Thanks
You can't kill a 60... Believe me... I've tried...
In the end, you can... drive a gu now... still want a 60
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Post by bundytunna »

SEARCH
i wrote a whole atricle sumwhere on how to bl a 60
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

They are different lengths you need to pull them all out from one side then go and get the new ones 2 inches longer than each one.

do a search its been talked about heaps.

one clue is that the rear ones are accessed through a plate that you take off and u will need to put the bolt in the opposite way to what it was factory as it wont fit through the gap.

remember to lossen off the steering shaft before lifting and you need to drop the radiator down 2 inches which is easy to do.

if it is the non-vacum assisted transfer case ie the old ones pre 85 then you will need to loosen off the selector booting a little
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Posts: 125
Joined: Fri Jan 02, 2004 3:38 pm
Location: perth - for the time being, Leaving when I can afford it

Post by Birlo »

Thanks
I don't get on much
You can't kill a 60... Believe me... I've tried...
In the end, you can... drive a gu now... still want a 60
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest