Hi all,
wondering if anyone had any ideas on where I can get lower ratio crown wheel an pinion for my NG?
Currently at 4.625 with 33'in tyres so its driving like a dog, not to mention having no engine braking.
I've done a bit of research and found that 4.875 and 5.29 were both made. Are there any places in Melbourne that stock these? I've got the 8'in the front and a 9'in diff in the back.
Would the crownwheel and pinion out of other mitsubishi models, such as the l300 vans etc be compatible?
Any suggestions will be much appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sourcing diff centers
Moderator: -Scott-
Yep I'll be running a Mitsu 5.29 in my rear 9" (scored off a mate) and a Toyo HP 5.29 in the front.
You can get a 9" rear 4.875 from a wreckers but they will only sell the centre about $450 roughly. I'd sell you mine but I want to keep it.
The front 8" 4.875 has to be a low pinion (eg - Gen 1 V6) or a 8" 2.6 rear 4.875 which will bolt straight into the front of your Gen 1 V6 diff. Super Select front diffs are high pinion and not compatible with yours unless you do a swap.
The 5.29 is pretty rare now the 9" rear was found in Gen 2 2.5TDI's so you maybe able to find one at a wreckers new from Mitsu they are around $680 (still available in small quantities).
The front is your biggest problem world supplies of 8" low pinion 5.29's are virtually gone but Mitsu maybe persuaded to do a batch. There were 13 left at the Japan central store last year but they have been sold. Me and 2 other guys spent hours tracking part no's of these rare 5.29's. Once we worked out what fits what and announced the part no's the remaining stocks were virtually bought up.
Your best bet is to try and find a Gen 1 2.3TD most of these ran 5.29's the 8" rear will bolt straight into the front of a Gen V6. When I say bolt in I mean the C&P and not the diff centre.
4.875's are reasonably easy to find from wreckers but if you are serious about 5.29's let me know
Good wreckers to try :-
- Mitsi Smart Parts (Ballarat) - 5334 1806 (Jeff) they will deliver as well.
- Imlachs (Clayton) - 9552 1999
You can get a 9" rear 4.875 from a wreckers but they will only sell the centre about $450 roughly. I'd sell you mine but I want to keep it.
The front 8" 4.875 has to be a low pinion (eg - Gen 1 V6) or a 8" 2.6 rear 4.875 which will bolt straight into the front of your Gen 1 V6 diff. Super Select front diffs are high pinion and not compatible with yours unless you do a swap.
The 5.29 is pretty rare now the 9" rear was found in Gen 2 2.5TDI's so you maybe able to find one at a wreckers new from Mitsu they are around $680 (still available in small quantities).
The front is your biggest problem world supplies of 8" low pinion 5.29's are virtually gone but Mitsu maybe persuaded to do a batch. There were 13 left at the Japan central store last year but they have been sold. Me and 2 other guys spent hours tracking part no's of these rare 5.29's. Once we worked out what fits what and announced the part no's the remaining stocks were virtually bought up.
Your best bet is to try and find a Gen 1 2.3TD most of these ran 5.29's the 8" rear will bolt straight into the front of a Gen V6. When I say bolt in I mean the C&P and not the diff centre.
4.875's are reasonably easy to find from wreckers but if you are serious about 5.29's let me know
Good wreckers to try :-
- Mitsi Smart Parts (Ballarat) - 5334 1806 (Jeff) they will deliver as well.
- Imlachs (Clayton) - 9552 1999
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests