now i know guys have done this b4, how did you address where the diff centre is, as its, well, not in the centre
anyhting else i should be aware of b4 i get started too?????
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cruiser diffs on a lux..........help
Moderators: toaddog, Elmo, DUDELUX
cruiser diffs on a lux..........help
looking at putting some 40series diffs on my 85 model hilux
now i know guys have done this b4, how did you address where the diff centre is, as its, well, not in the centre
anyhting else i should be aware of b4 i get started too?????
now i know guys have done this b4, how did you address where the diff centre is, as its, well, not in the centre
anyhting else i should be aware of b4 i get started too?????
My name is Rob.
Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
dont worry about it
as long as the output on your t-case and the pinon flange of the diff is at the same angle, it will work no worries with no vibration
as long as the output on your t-case and the pinon flange of the diff is at the same angle, it will work no worries with no vibration
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Off center diffs
If you have say a centered diff axle in the rear on a pickup and you use a crusier trans with the output to the right like the 55 yes it goes to the right a bit, angle down is still the same so it would work fine? Or am i just to far gone!
Re: cruiser diffs on a lux..........help
Elmo wrote:looking at putting some 40series diffs on my 85 model hilux
Just curious but WTF are you doing that for?
robs a drunk nut bar at the best of times, no he has these diffs and already with cross over high steer done and have 6.1's already installed for the 37 mtr's
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
im mainly doing it cause like simon said, i have these sitting in my garage already, they've already got hi steer, 6.1's and lockers in em, i figure i may as well use em if i've got em, although yes 60 series would be nice but then so would 80 series diffs or even patrol ones too
why dont you reckon the 6.1's would last with the 37's???
why dont you reckon the 6.1's would last with the 37's???
My name is Rob.
Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
Daily Tourer: GU - 6.5 Chev Turbo, ARB's, 33's, Barwork, Drawers etc
Play: Hilux dual cab - 5 litre, Twins, Buds front & 2010 rear, 35s
Comp: Ruffs old green Hilux
Who is online
Users browsing this forum: No registered users and 7 guests