Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What offset?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

What offset?

Post by P_Byrne »

I was wondering what offset would be recommended for a set of 30" Motorway muddies on 15x7 sunnies? Would bog standard be good enough, or should I get something different?

Going onto SWB WT with 2'' spring lift only at this point.

I have had a search, the word "offset" appears in just about every other thread :roll:

Cheers,

Paul
90 WT Tin Top - Stock noisemaker and gears :(
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

I'd want more offset to stop springs rubbing so
-10mm or -13mm would be good....

you should be able to buy new rims for aroung $50-60 with these offsets.

-25mm is also good for extra stability but creates more load on wheelbearings and the angle of sweep on steering may cause other clearance issues. these are also harder to find.

-25 is also outside the 50mm offset restriction when both wheels are considered.
Top
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

new 15x7 sunnys come in -3, -15, and -28 off the shelf.
try http://www.speedywheels.com.au and also
http://www.roh.com.au

any others guys?
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

go -28, for stability offroad
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

The bigger offset is worth it, with -28 you can feel the difference. You will also need to cosider flares too.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

these rims are F100 rims anyone know the offset of these??

HR
Last edited by HRZOOK on Wed Mar 02, 2005 5:16 pm, edited 1 time in total.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

HRZOOK wrote:Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

HR


wider than laytons

and widest offshelf
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Mine are 70mm from centre face.

what soes that make these? I am thinking of getting more offset done.

thanks
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

RB zook wrote:
HRZOOK wrote:Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

HR


wider than laytons

and widest offshelf


Get some custom rims made up.....really :cool:

The extra offset really helps
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Your standard CSA type steel rim will be fine, once you flip it :armsup:

Long live 7 inch offset rims
Top
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

just buy early jeep cj5 or 7 off set i run them on mine 8in with 32x10.5 early jeep same stud pattern as zook nothing rubs and adds good width too :D
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Top
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

how much heavier are 8" rims?
[Edit: also, how heavy are mongrels?]

its not so much a problem offroad, but any more weight on the bitumen is a bit hard on std brakes..
my 31x10s on 15x7 rims feel almost twice as heavy as my 215/75 muddies on std 5.5" rims.
on the road, i know my cookies are heaps better braking-wise.
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

HRZOOK wrote:Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

these rims are F100 rims anyone know the offset of these??

HR


Just looked at some old photos of Ryans zook, i they look like -28. Slightly more than mine, which are -25. Slightly off topic, anyone in Newy had rims reversed, i been lookin at it. Promac apparently do it for $70 a rim, just wondering if anyone up this way has looked into it.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 83
Joined: Mon Aug 09, 2004 5:10 pm
Location: Gold Coast

Post by zookwithdreams »

lay80n wrote:
HRZOOK wrote:Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

these rims are F100 rims anyone know the offset of these??

HR


Just looked at some old photos of Ryans zook, i they look like -28. Slightly more than mine, which are -25. Slightly off topic, anyone in Newy had rims reversed, i been lookin at it. Promac apparently do it for $70 a rim, just wondering if anyone up this way has looked into it.
Layto....


You can tell 3mm from a photo?
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

nah layton knows my rig fairly well

thou you will find he has best offset in 15x7 i had 15x8 and they were more offset again
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

i thought -15 was the best offset you can hope for with a 15x7?
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

zookwithdreams wrote:
lay80n wrote:
HRZOOK wrote:Hey RB

What is the offset of the rims you sold me .... -3, -15, and -28????

these rims are F100 rims anyone know the offset of these??

HR


Just looked at some old photos of Ryans zook, i they look like -28. Slightly more than mine, which are -25. Slightly off topic, anyone in Newy had rims reversed, i been lookin at it. Promac apparently do it for $70 a rim, just wondering if anyone up this way has looked into it.
Layto....


You can tell 3mm from a photo?


Ive seen plenty of the little purple junk before.
I got 15x8 too, so my offset will be different to 15x7 as well.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests