Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series brake pads

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

80 series brake pads

Post by g35me »

just finished replacing the front brake pads in my 80 series. I didnt play close enough attention to which way I put them in and was wondering if those little metal clips at the bottom of the pad were meant to be in a certain direction. What the hell do those metal clips do anyway?

Thanks.
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 101
Joined: Wed Feb 23, 2005 1:27 pm
Location: Nth.Brisbane Qld.

Post by NiftyNev »

They are a wear indicator.They are set slightly above the metal backing plate and when the pads wear down to this point they rub on the disc and make a noise so you know it's pad replacement time again.They are riveted to the backing plate.

Neville
'92 Toyota Surf LN130
2.4 Turbo Diesel
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest