Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swampers

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Swampers

Post by Maggot4x4 »

Put the swampers on yesterday for a look and play. 38x12x16 TSL's

Image

Image

Image

Image
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Looks awesome. :cool:

Do they rub anywhere? Should give the axles a good test out.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

TuffRR wrote:Looks awesome. :cool:

Do they rub anywhere? Should give the axles a good test out.


They rub on that cross bar at the front, nothing 3" spacers or adjusting the steering stops wont fix.

The GQ axles should be up to it unlocked.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

I assume you've got 2 inches in the body and springs or is it more than that?
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

TuffRR wrote:I assume you've got 2 inches in the body and springs or is it more than that?


1 & 3/4 body and 4" coils. Oh, and polyairs in the back to limit up travel. Thinking about them for the front as well.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Should have left Rover axles and 33"
you still have same clearance... :rofl: :rofl:
TD5 96 Discovery UTE.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

mickrangie wrote:Should have left Rover axles and 33"
you still have same clearance... :rofl: :rofl:


But I don't have twigs turning they tyres anymore :D
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Me Too :finger:

My Rig wont fall over :finger:
TD5 96 Discovery UTE.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

mickrangie wrote:Me Too :finger:

My Rig wont fall over :finger:


all rigs can fall over :finger:

Mine is 100mm wider than yours so even less likely :finger:
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Looks good man get us some wheeling pics when she's ready! :armsup:
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Its hard to tell, but they dont look any bigger than 35's?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

very nice.

Michael
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 876
Joined: Wed Apr 14, 2004 7:30 pm
Location: Terrigal, NSW

Post by fightara »

Maggot4x4 wrote:
TuffRR wrote:I assume you've got 2 inches in the body and springs or is it more than that?


1 & 3/4 body and 4" coils. Oh, and polyairs in the back to limit up travel. Thinking about them for the front as well.


Looks very :cool:

Why note just extend bumpstops instead of using Polyairs?

What you doing for gearing?

loanrangie wrote:Its hard to tell, but they dont look any bigger than 35's?


I reckon it doesn't look as big in the photos because of the 4" spring lift. It does kinda look like a 35s/2" and body combo, until you work out that those 16s come to the sills, with roughly 10" of tyres below them, meaning those sills must be nearly 650mm high!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

fightara wrote:
Maggot4x4 wrote:
TuffRR wrote:I assume you've got 2 inches in the body and springs or is it more than that?


1 & 3/4 body and 4" coils. Oh, and polyairs in the back to limit up travel. Thinking about them for the front as well.


Looks very :cool:

Why note just extend bumpstops instead of using Polyairs?

What you doing for gearing?

loanrangie wrote:Its hard to tell, but they dont look any bigger than 35's?


I reckon it doesn't look as big in the photos because of the 4" spring lift. It does kinda look like a 35s/2" and body combo, until you work out that those 16s come to the sills, with roughly 10" of tyres below them, meaning those sills must be nearly 650mm high!


Because when I'm running 35's etc I can keep all my wheel travel.

These tyres are not ment for this truck anyway, they are for my other rangie when it's finished.

Just thought i'd see if they fit.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Maggot4x4 wrote:
fightara wrote:
Maggot4x4 wrote:
TuffRR wrote:I assume you've got 2 inches in the body and springs or is it more than that?


1 & 3/4 body and 4" coils. Oh, and polyairs in the back to limit up travel. Thinking about them for the front as well.


Looks very :cool:

Why note just extend bumpstops instead of using Polyairs?

What you doing for gearing?

loanrangie wrote:Its hard to tell, but they dont look any bigger than 35's?


I reckon it doesn't look as big in the photos because of the 4" spring lift. It does kinda look like a 35s/2" and body combo, until you work out that those 16s come to the sills, with roughly 10" of tyres below them, meaning those sills must be nearly 650mm high!


Because when I'm running 35's etc I can keep all my wheel travel.

These tyres are not ment for this truck anyway, they are for my other rangie when it's finished.

Just thought i'd see if they fit.


Its all good man! IT LOOKS :cool:
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Maggot4x4 wrote:
mickrangie wrote:Me Too :finger:

My Rig wont fall over :finger:


all rigs can fall over :finger:


Mine is 100mm wider than yours so even less likely :finger:


:Fade-color
TD5 96 Discovery UTE.
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

More cutting :D

Lift those flares.

Looking :cool:

Dave.
Land Rover Discovery - GQ conversion underway
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Too bad the diffs going to scrape on the ground :finger:
TD5 96 Discovery UTE.
Top
Posts: 106
Joined: Wed Aug 18, 2004 3:05 pm
Location: S.E Suburbs, VIC.

Post by PSI250 »

looking good,
i look forward to seeing some action shots with the swampers on.
How much scrubbing do you get??
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

mickrangie wrote:Too bad the diffs going to scrape on the ground :finger:

Fawk man give it a rest! Or do you have to much time on your hands! :finger:
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

BIg StEvE wrote:
mickrangie wrote:Too bad the diffs going to scrape on the ground :finger:

Fawk man give it a rest! Or do you have to much time on your hands! :finger:


Settle up champ :finger:

Just taking the piss ( ;) )

:rofl:
Land Rover Discovery - GQ conversion underway
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

look fawken orsum :cool:
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

BIg StEvE wrote:
mickrangie wrote:Too bad the diffs going to scrape on the ground :finger:

Fawk man give it a rest! Or do you have to much time on your hands! :finger:


:rofl:

Just takin da piss.... U guys are the one with too much time!! :finger:
TD5 96 Discovery UTE.
Top
Posts: 683
Joined: Thu Mar 06, 2003 3:42 am
Location: Sydney

Contact:
Contact GURU

Post by GURU »

mickrangie wrote:Too bad the diffs going to scrape on the ground :finger:
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 7 guests