Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hole in between engine and gear box? 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Hole in between engine and gear box? 80 series

Post by bruiser »

80 series. Petrol Manual
Just wanting to know what that big trapazoid shaped hole is where gear box and engine meet that faces forward. It should have a cover plate but mine is missing. Been missing for a while.

Just got back from Fraser and worried about sand that could have got in there.

Anyway. What's it for, and what will happen if shit gets in there?
Thanks
Steve
Last edited by bruiser on Tue May 03, 2005 3:21 pm, edited 2 times in total.
Top
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

If I am not mistaken, that the inspection hole for clutch area and flywheel. If left open you''ll get a load of dust and other unwanted crap inside!
Top
Posts: 291
Joined: Wed Jun 16, 2004 10:44 am
Location: Adelaide

Post by sambo »

if its auto then it sounds like it could be the access hole to unbolt the torque converter when taking off the trans.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Petrol motor?? Thats where the timing marks are on a petrol, or a least the 2F.
I'd make a cover for it to keep any crap out tho.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Mate, thesame motor fits infront of an auto, and that hole is used to undo the torque convertor and do back up)
Andrew
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

So that hole is of no use on a manual?

So geting shit in there is not a problem?

Can I put the hose in there and clean it out?
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Bruiser,

You could put the hose in there!

Better make up a rubber cover for it....keep the crap out!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

bruiser wrote:So that hole is of no use on a manual?

So geting shit in there is not a problem?

Can I put the hose in there and clean it out?


Cover it up, as water in there will make the clutch slip, not to mention wear out if you get sand/mud inbetween it.
u would probably pay $10 for a spare at yota
Andrew
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

Summing up What is it for :roll: :roll: :roll: :armsup: :armsup: :armsup: :?:
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

bruiser wrote:Summing up What is it for :roll: :roll: :roll: :armsup: :armsup: :armsup: :?:


To undo an auto if you have one and to earn yota money if you dont.
A
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests