Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series Diffs- Factory Lockers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

80 Series Diffs- Factory Lockers

Post by scotto »

Question about 80 series diffs with factory lockers--

If I pulled a factory locker out of an 80 series diff (front and or rear)
will the entire locker setup come out leaving a standard diff housing?

My point - are the housings the same -the engaging mechanism attached to the pumpkin itself yes..

Also, I have heard (from a knowledgable source - sorry dude just fishing for tips :oops: ) you need to be real careful in wiring them up - does anyone think they can not be wired up with fairly straight forward switches/relays etc like elec window switch.

Anyways its not all about the diff centres

Thanks scotto
Last edited by scotto on Thu May 05, 2005 6:39 pm, edited 3 times in total.
www.3rdrock4x4.com
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: 80 Series Factory Lockers....

Post by bad_religion_au »

scotto wrote:Question about 80 series diffs with factory lockers--

If I pulled a factory locker out of an 80 series diff (front and or rear)
will the entire locker setup come out leaving a standard diff housing?

My point really - is the engaging mechanism attached to the diff housing or the pumpkin itself?

Also, I have heard you need to be real careful in wiring them up - does anyone think they can not be wired up with fairly straight forward switches/relays etc....


Thanks scotto



what are you planning scotto...

there is a good writeup on ih8mud for fitting these E lockers to 40 and 60 series housings (therefore i guess the center has all the locker crap associated, and the housing is the same)
Spit my last breath
Top
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Re: 80 Series Factory Lockers....

Post by scotto »

bad_religion_au wrote:what are you planning scotto...

there is a good writeup on ih8mud for fitting these E lockers to 40 and 60 series housings


that's good news for anyone who is using 40 or 60 housings...........;)
www.3rdrock4x4.com
Top
Posts: 232
Joined: Tue Nov 25, 2003 1:35 am

Post by ozrunner »

Yes the locker comes out complete but the locker housing is different to a stocker and you will need to modify a stock housing but its a simple excercise involving a grinder, a bit of weld and a drill :D
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: 80 Series Factory Lockers....

Post by bad_religion_au »

scotto wrote:
bad_religion_au wrote:what are you planning scotto...

there is a good writeup on ih8mud for fitting these E lockers to 40 and 60 series housings


that's good news for anyone who is using 40 or 60 housings...........;)


inferring that the locker does come out whole... and the mods for the 40 or 60 housing are similar to the 80 housing so i've been told...

so how much lift do i need to fit 34's
Spit my last breath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests