I have a 253 V8, 4 speed, 35s and 4.11s at the moment.
She sits on about 2400rpm @ 100kph.
Gearing seems OK for wheeling (rock crawling) with the 35s. Could be a little lower.
How will my car run with 37s ? What should I change the ratios to ? I still want to be able to do more than 80 kph.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ratios
Moderators: toaddog, TWISTY, V8Patrol, Moderators
bj on roids wrote:mine could pull over 80kph with 42s, but i only had a six cylinder, 4.11 diffs
dont be a whimp, MAN UP on some 37" 8)
I am more worried about losing crawling ability :( My clutch doesn't like it
I was thinking diff ratios are cheaper than crawler gears, so try that first.
What ratio would I need on 37s to get about the same (or lower 8) ) crawl ratio as I have now on 35s and 4.11s ?
Who is online
Users browsing this forum: No registered users and 3 guests