Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Injection pump control motor

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Injection pump control motor

Post by borisr33 »

Hi all,

This is my first post here.....but i have gained a lot of vauable information before hand when buying my SD33T powered MK!!!

As per the subject i have come across the problem that my MK will not turn off. So i hit the search section and found a few posts...pulling the injector pump controll motor apart i found that the brush on the motor has broken off!!! :bad-words:


Now apart from replacing this part i would like a few questions answered?
Does this motor really have three positions that it adjusts the cut off lever on top of the fuel pump? Being a start position, run, and shut off???

If so can i please get someone to take a picture of the position of the lever when the car is running?

Bellow are some pictures that i took

Im asking this beacuase if i where to use a choke lever to shut the car down i would like to know where the run position of the shut off lever is.

Thankyou all in advance ;)
You do not have the required permissions to view the files attached to this post.
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

here is a picture of the broken brush
You do not have the required permissions to view the files attached to this post.
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ist thing is to fix the brush.
Manually operatingb this is not that easy. also motor is controlled thru oil light to turn fuel off if engine is kicked in reverse or oil pressue is 0.

Bazzle
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

thanx for the advice bazzle!!

I did end up fixing the brush holder and putting a new brush in...works perfect now!! :)

As for the operating positions of the shut off lever I found out some interesting info...though it might come in handy for someone

SD33T has run and off positions only - lever all the way to the front of the pump for run and all the way back for off

SD33 has start, run and shut down

as to why I have no idea???

thanx again
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

You have just made my day, i have been trying to find out that info for around 1 year now even bought the factory manual, but it doesnt help either

Thanks

David
turbo deisel LWB, 2inch body, endless air, arb front and rear lockers, 34 JT2s, warn winch, carputer/GPS, working handbreak,
Posts: 43
Joined: Tue Jan 20, 2004 9:18 am
Location: Townsville QLD

Post by roadkill »

I have a problem with this motor as well on my SD33T. The motor randomly turns off, on, off, on irregularly and it seems to get worse after some revving. From reading the other posts on this subject I pulled the motor apart to clean it - but it was perfectly clean inside and no visible damage to anything.

Does anyone have an idea what would be causing the motor to do this?
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

blundera wrote:I have a problem with this motor as well on my SD33T. The motor randomly turns off, on, off, on irregularly and it seems to get worse after some revving. From reading the other posts on this subject I pulled the motor apart to clean it - but it was perfectly clean inside and no visible damage to anything.

Does anyone have an idea what would be causing the motor to do this?


I'd disconnect the pump control motor and take it for a run to see if it still happens (you'll have to stall it to stop the motor - mines like this now :cool: ) that'll eliminate the pump controller, if its still doing it i'd hazard a guess and say its a fuel prob, maybe air is getting into the system somewhere? when was the fuel filter changed last? I'd check all that and if you cant see anything obvious i.e. diesel leaks, take it to a diesel service place.
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 43
Joined: Tue Jan 20, 2004 9:18 am
Location: Townsville QLD

Post by roadkill »

I have done that - it definately is the injector pump control motor, as the car works fine with it disconnected and when it is connected I can see the motor moving while the car is running. Is there a relay or something that controls it or is all the electrics for it contained within the motor?
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

electronics is under the cover of the rhs front guard, i susspect a fauly plug
turbo deisel LWB, 2inch body, endless air, arb front and rear lockers, 34 JT2s, warn winch, carputer/GPS, working handbreak,
Posts: 43
Joined: Tue Jan 20, 2004 9:18 am
Location: Townsville QLD

Post by roadkill »

have checked them too and all plugs and inside the electrical boxes is all good :?
Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests