just wondering if there is any easy way to bend some 3mm aluminium checkerplate that i am using to make some guards for the rear corners of my zook.
any ideas appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Checkerplate
big fat drainpipe (steel, concrete) rag to cover the checkerplate, piece of 4x2 and a mallet.
cut the plate as best you can, then lay the checkerplate over the pipe to the right angle for the bend/curve, then flog the piece of wood in the right place with the mallet.
cut the plate as best you can, then lay the checkerplate over the pipe to the right angle for the bend/curve, then flog the piece of wood in the right place with the mallet.
ht zook with bog, rust and mt's
this is my wheelbase |<-------->|
this is my wheelbase |<-------->|
The shape in the rear 3/4 of a sierra is a bit more complex than you think - most commercial rear corners have a cut and weld in then somewhere ( the spot varies) so they can have a bit of a bend in them becuse the rear corner is convex not straight up and down.
IMHO checkerplate looks hack and makes for lost capability ( no, really) because when you are sitting on it it grabs the tree/rock/bank/car and will make it harder to drive off of. Also, aluminium galls so when you are sitting against a rock it will drag and gouge. the rock will bite into it, again, making it harder to drive off.If it was me, I would go with about 2mm(not over) steel plate as this will let the car slide off of obstacles easily.
IMHO checkerplate looks hack and makes for lost capability ( no, really) because when you are sitting on it it grabs the tree/rock/bank/car and will make it harder to drive off of. Also, aluminium galls so when you are sitting against a rock it will drag and gouge. the rock will bite into it, again, making it harder to drive off.If it was me, I would go with about 2mm(not over) steel plate as this will let the car slide off of obstacles easily.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 2 guests