Can someone who has a pile of bits lying around please make a couple of measurements for me, I need:
The width of a Rover diff centre: side gear - side gear
The width of a Salisbury diff centre: side gear - side gear
The casting width of a Salisbury centre: axle tube - axle tube
The length of both the long and short inner axles (without CV) from a Range Rover or a 110.
I know the production tolerances seemed to vary quite a bit so would be happy for a few measurements of each from different people.
Would be very grateful, thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Measurements Please???
Moderator: Micka
Measurements Please???
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Measurements Please???
Got some 4u
long 835mm
short 449
overall o.d. rvr centre ,bearing to bearing 157.5 approx
30mm each side of carrier bofore internal splines
I am measuring a standard 10 spline rvr diff and front axles circa 1974
I am not completly clear on what you need although I have a diff centre only, diff centre with housing and axles as above.
Greasy hands, happy man.
long 835mm
short 449
overall o.d. rvr centre ,bearing to bearing 157.5 approx
30mm each side of carrier bofore internal splines
I am measuring a standard 10 spline rvr diff and front axles circa 1974
I am not completly clear on what you need although I have a diff centre only, diff centre with housing and axles as above.
Greasy hands, happy man.
out of my mind, back soon.
Cheers Swamp.
I am trying to work out the axle lengths I need for the custom axles I am having made for me.
If you can, would you also be able do measure the depth of spline engagement at the diff and the CV end? Should be around 1" - you should be able to tell by where the wear marks start on your axles.
Anyone have a salisbury lying around?
I have attached a pic to hopefully make things clearer
I am trying to work out the axle lengths I need for the custom axles I am having made for me.
If you can, would you also be able do measure the depth of spline engagement at the diff and the CV end? Should be around 1" - you should be able to tell by where the wear marks start on your axles.
Anyone have a salisbury lying around?
I have attached a pic to hopefully make things clearer
You do not have the required permissions to view the files attached to this post.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Measurements Please???
Long axle spline engagement - 10spl-29 to 30.25
24spl-26 to 28.5 ,
overall spline legth with 10mm bush- 30.8mm
Short axle engagement 10spl - 30.1 to 31.1
24spl - 27.5 to 29
overall 24spline length with 10mm bush fitted 31mm
O.D of centre in housing from side cage to side cage 187mm
I can't work out how to get an accurate measurement from side gear to side gear.
Saw a unimog today that is getting built up 40" michelins superchaged diesel putting a body on it at the mo, he also had a Pinny and a Gwagon
He who dies with the best toys wins .
24spl-26 to 28.5 ,
overall spline legth with 10mm bush- 30.8mm
Short axle engagement 10spl - 30.1 to 31.1
24spl - 27.5 to 29
overall 24spline length with 10mm bush fitted 31mm
O.D of centre in housing from side cage to side cage 187mm
I can't work out how to get an accurate measurement from side gear to side gear.
Saw a unimog today that is getting built up 40" michelins superchaged diesel putting a body on it at the mo, he also had a Pinny and a Gwagon
He who dies with the best toys wins .
out of my mind, back soon.
Re: Measurements Please???
Cheers swamp, thanks for all the measurements.swamp wrote: I can't work out how to get an accurate measurement from side gear to side gear.
To measure side gear to side gear, can you run a tape measure or ruler through the middle of the diff centre? Probably not the easiest thing to do...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Re: Measurements Please???
Is this dirtyhands?swamp wrote:Long axle spline engagement - 10spl-29 to 30.25
24spl-26 to 28.5 ,
overall spline legth with 10mm bush- 30.8mm
Short axle engagement 10spl - 30.1 to 31.1
24spl - 27.5 to 29
overall 24spline length with 10mm bush fitted 31mm
O.D of centre in housing from side cage to side cage 187mm
I can't work out how to get an accurate measurement from side gear to side gear.
Saw a unimog today that is getting built up 40" michelins superchaged diesel putting a body on it at the mo, he also had a Pinny and a Gwagon
He who dies with the best toys wins .
If so, I've been on a daytrip with the pinny.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Measurements Please???
Yes Gwagen
He offered the mog to me for a mere 200 thou
all i need is another umm 200thou
He knew of lecturer at the nearby uni with a pinny who I suspect to be Prof Pinz.
He offered the mog to me for a mere 200 thou
all i need is another umm 200thou
He knew of lecturer at the nearby uni with a pinny who I suspect to be Prof Pinz.
out of my mind, back soon.
Who is online
Users browsing this forum: No registered users and 1 guest