Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

seatbelts 4 roadworthy

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 20
Joined: Sun May 08, 2005 5:27 pm
Location: Brisbane Northside

seatbelts 4 roadworthy

Post by Orange 47 ute »

My car is nearly complete and ready 2 register but the seatbelts are shagged. Due to the age of the car there are no good second handies around. Any fellow 40 series owners had 2 replace their seatbealts and if so where did they get them from? I was considering retrofitting 75 series ones an am wondering if they fit.
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

assuming you have already tried the wreckers, you might want to try a dedicated seatbelt manufacturer (yellow pages). There is a guy in sydney who did my belts for me but that probably doesnt help you very much being in queensland does it! The other alternative would be your local accessories shop where you could get race harnesses fitted. Retro fitting from a 75 series shouldnt be too difficult as long as the belt lengths are similar etc. It would probably be the cheaper option too.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

If they are only fraid at the edges, for a quick fix for rego and only a quick fix take to the with a lighter and burn them off. :roll: If to bad for that you will have to find a specialst.
Its not cool, unless it's got boost :)
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

early 1980's celica bolt straight up to 40 standard mounts
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

You could try Sunshine State 4wd I think they are in Acacia Ridge, they have or can get a lot of toyota parts.
Top
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

In NSW even with harness`s fitted you must still have a normal seat belts fitted and working .
2001 100 series stock as a rock
Top
Posts: 91
Joined: Sun Sep 12, 2004 11:31 am
Location: brisbane north

Contact:
Contact low40

Post by low40 »

repco or autobarn prob cost about $100 for the two
no more forty now have a 80
Top
Posts: 20
Joined: Sun May 08, 2005 5:27 pm
Location: Brisbane Northside

Post by Orange 47 ute »

Already tried sunshine state 4wd and no go. Had a look on rare spares website and they were 400 a set. So will try wreckers 4 celica ones and get my mate to try repco as he has an account there and gets a good discount there. thanx
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 86 guests